Loctite 60 Seconds All Purpose Glue 20g (4 Pack) - White

While the initial bond sets in 60 seconds, full cure strength is typically achieved within 24 hours. Avoid stressing the bond until it has fully cured.

This adhesive is not ideal for fabric as it creates a rigid bond and may stiffen the material. It's best suited for hard surfaces.

It can bond glass to other materials, but it is not recommended for applications where the glass bond will be submerged in water or subjected to significant stress, as it may not be waterproof or offer long-term durability for glass-to-glass bonds.

Loctite 60 Seconds All Purpose Glue is generally water-resistant once cured, but it is not fully waterproof and should not be used for applications that will be continuously submerged in water.

Store the tubes in a cool, dry place, away from direct sunlight and heat, with the caps tightly secured after each use.

Unopened, the glue typically has a shelf life of 1-2 years when stored correctly in a cool, dry environment. Once opened, its performance may degrade faster if not sealed properly.

No, this cyanoacrylate adhesive should not be used on Styrofoam or polystyrene as it can dissolve or damage these materials.

Ensure surfaces are clean, dry, and free of contaminants. Apply sufficient pressure for the initial 60 seconds. For certain plastics, a primer might be necessary, or the material may not be compatible.

Do NOT pull bonded skin apart. Soak the bonded area in warm, soapy water and gently peel or roll the skin apart. Use nail polish remover (acetone) to gently loosen glue from hard surfaces, testing in an inconspicuous area first.

Carefully try to clear the tip with a fine pin or needle. Store the tube upright with the cap on tightly to prevent drying.

This is an instant adhesive designed for rigid bonds. If the application requires flexibility, consider a different type of adhesive. Ensure parts are held firmly during the 60-second bonding period.