Bitumen Paint - Black - 5L
Not Available
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps users understand and effectively apply Bond-It Bitubond Bitumen Paint. Ideal for anyone needing a durable, waterproof coating for various outdoor surfaces like steelwork, concrete, and roofing felt, it offers excellent weatherproofing. A key caveat: ensure surfaces are thoroughly clean and dry before application for optimal performance. This guide covers key features, application instructions, and troubleshooting tips to ensure successful use.
All features
| Colour | Black |
|---|---|
| Model Part Number | 5060021360922 |
| Brand | Bond it |
Extended Product Information
FAQs
What surfaces can I apply Bitubond Bitumen Paint to?
It can be applied to steelwork, concrete, roofing felt, fibre/cement, corrugated iron, asphalt, and wood.
How should I prepare the surface before applying the paint?
The surface must be clean, dry, and free from grease, oil, and loose debris. For rust, wire brushing is recommended.
How many coats of paint should I apply?
Apply at least two coats for optimal protection.
How long does it take for the paint to dry?
Drying time is approximately 6 hours, depending on conditions.
Can I use Bitubond Bitumen Paint on a potable drinking water tank?
No, it is not suitable for potable drinking water tanks.
What should I do if the paint is bleeding through a subsequent coat?
Apply a primer recommended by the subsequent paint manufacturer before applying the topcoat.
How should I clean the application tools?
Clean tools immediately after use with a suitable solvent.
Is the paint ready to use?
Yes, the paint is supplied ready for use and should not be thinned.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and free from contaminants. Roughen smooth surfaces before application if needed.
Paint is taking longer than expected to dry.
Check the ambient temperature and humidity. Ensure adequate ventilation. Drying time can be affected by weather conditions.
Paint appears to be bleeding through subsequent paint applications.
Apply a primer recommended by the subsequent paint manufacturer before applying the topcoat.
Pros and Cons
Pros
- Excellent waterproofing properties.
- Helps prevent corrosion and decay.
- Easy to apply with common tools (brush, roller, spray).
- Suitable for a wide range of materials.
- Forms a durable and long-lasting protective layer.
- Odourless and taint-free when dry
Cons
- Not suitable for potable drinking water tanks.
- Requires clean, dry surfaces for effective application.
- Not recommended for areas with likely subsequent solvent contact.
- May require a primer if overcoating with other paints.
- Drying time is approximately 6 hours, which may vary depending on conditions.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and loose debris. For rust, wire brushing is recommended.
- Priming (if necessary): If rust is present, apply a rust inhibitor primer before the Bitumen Paint.
- Application: The paint is ready to use and should not be thinned. Apply at least two coats using a brush, roller, or spray.
Compatibility
- Compatible with a wide range of surfaces including steelwork, concrete, roofing felt, fibre/cement, corrugated iron, asphalt, and wood.
- Ensure compatibility with any subsequent topcoats; consult the topcoat manufacturer for primer recommendations.
Care
- Allow sufficient drying time (approximately 6 hours) between coats and before exposing the coated surface to the elements.
- Store the paint in a cool, dry place, away from direct sunlight and heat. Keep container tightly closed when not in use.
- Clean tools immediately after use with a suitable solvent.