Danelaw Roll Out Ridge/Hip System - HD CON6+ - 6m
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Danelaw Roll Out Ridge/Hip System (6m) is designed for professional roofers seeking a reliable, engineered solution for ridge and hip applications. Its key benefit is the combination of flexible gasket technology and advanced water management, ensuring superior protection against moisture ingress across various roof profiles. A potential consideration is the need for precise trimming of the gasket, which requires a skilled hand for optimal adaptation.
All features
| Model Part Number | HD CON6+ |
|---|---|
| Brand | Danelaw |
Extended Product Information
FAQs
What is the primary function of the trimmable gasket?
The trimmable gasket allows the installer to precisely adapt the system to the specific contours of the ridge or hip line, ensuring a seamless and weather-tight fit regardless of minor variations in roof pitch or structure.
How does the system manage water ingress?
The system features integrated continuous water channels that direct water away from the ridge or hip, combined with self-sealing details that enhance protection against moisture penetration.
Can this system be used on any roof pitch?
The broader corrugation profile is designed to accommodate a range of roof pitch configurations, offering flexibility for various applications. However, always confirm compatibility with specific project requirements.
What is the length of the Danelaw Roll Out Ridge/Hip System?
The system is supplied in a 6-meter length (HD CON6+).
How is the system secured to the roof?
The system features a wider Butyl strip that provides strong, long-lasting adhesion to the roofing substrate when firmly pressed into place.
Is special tooling required for installation?
Basic roofing tools, including a sharp utility knife for trimming the gasket and a roller for applying pressure to the Butyl strip, are typically required. Standard safety equipment for roofing work should also be used.
What maintenance is needed after installation?
Minimal maintenance is required. Regular visual checks for debris or damage are recommended. Keep the channels clear of obstructions like leaves.
Troubleshooting
Gasket not sealing properly
Ensure the gasket has been precisely trimmed to fit the contour of the roofline. Verify the roofing substrate is clean and dry before applying the Butyl strip for maximum adhesion.
Water pooling on the ridge/hip
Check that the continuous water channels are clear of debris. Ensure the system has been installed flat and without any significant dips or high points that could impede drainage.
Butyl strip adhesion is weak
The substrate must be completely clean, dry, and free from dust or oils. Ensure sufficient pressure was applied during installation to activate the adhesive. Avoid installation in freezing temperatures or on wet surfaces.
System appears damaged after installation
Carefully inspect for any tears or cuts in the gasket or material. If damage is found, it may require localized repair or replacement of the affected section, following manufacturer guidelines.
Pros and Cons
Pros
- Offers robust water management capabilities with continuous channels and self-sealing details.
- The trimmable gasket ensures a precise fit for various ridge and hip configurations.
- The wider Butyl strip provides strong, long-term adhesion.
- Accommodates multiple roof pitch requirements due to its broader corrugation profile.
- Engineered for professional installations, prioritizing durability and reliability.
Cons
- Requires careful trimming of the gasket for optimal performance, demanding skilled installation.
- As a specialized roofing component, it may require specific installation knowledge.
- The 6m length might necessitate joining for longer ridge or hip runs, requiring appropriate sealing techniques.
Setup, Compatibility & Care
Setup: The system is designed for straightforward installation by qualified roofers. Unroll the system along the ridge or hip line. The patented gasket should be trimmed using a sharp utility knife to ensure a precise fit against the roofing material. The integrated wider Butyl strip should be firmly pressed onto the clean substrate to ensure optimal adhesion. Ensure the system is laid flat and secured according to roofing best practices.
Compatibility: The broader corrugation profile is engineered to accommodate multiple roof pitch configurations. It is designed to integrate with standard roofing materials and systems. Always consult specific project requirements and local building codes for full compatibility assurance.
Care: Once installed, the system requires minimal maintenance. Regular visual inspections of the roofline are recommended to ensure no debris accumulation or damage has occurred. In areas with significant leaf fall or debris, occasional clearing may be beneficial. Avoid using harsh chemicals or abrasive cleaning agents, which could compromise the gasket or Butyl strip.