Unibond No More Nails Crystal Clear Grab Adhesive - White

Not Available Unibond No More Nails Crystal Clear Grab Adhesive - White

Not Available

High strength adhesive that eliminates the need for nails and screws. Adheres to most building mat...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to use Unibond No More Nails Crystal Clear for household projects. It offers a strong, clear bond, eliminating the need for nails and screws on various materials. However, be aware that surface preparation is crucial for optimal adhesion. This product is a high-strength adhesive ideal for building and repairing, featuring Flextec polymer for flexibility and resistance to extreme conditions. It's solvent-free and dries transparent, making it suitable for a wide range of applications.

All features

Colour	White
Model Part Number	B087VKLMKH
Brand	Unibond

Extended Product Information

FAQs

What materials can I use it on?

It is suitable for wood, glass, plastics, brick, tile, stone, ceramic, and metal.

Is it waterproof?

It is water-resistant, but not recommended for continuously submerged applications.

How long does it take to dry?

Drying time varies depending on the amount used, but it usually sets within a few hours. Full cure is achieved after 24 hours.

Can it be painted?

Yes, it is paintable.

Is it suitable for outdoor use?

Yes, it is UV and weather resistant.

How do I remove the adhesive?

While wet, it can be cleaned with a damp cloth. Once dry, it can be removed mechanically (e.g., scraping).

Troubleshooting

Adhesive isn't bonding.

Ensure surfaces are clean and properly prepared. Apply sufficient adhesive and allow proper curing time. Consider using a clamping system if needed.

Visible adhesive after drying.

Use less adhesive or remove excess adhesive with a damp cloth before it dries.

Difficulty in dispensing.

Ensure the nozzle is clear and properly aligned. If the adhesive is old, consider replacing it.

Pros and Cons

Pros

Eliminates the need for nails and screws, simplifying projects.
Bonds to a wide variety of materials, increasing versatility.
Provides a clear, transparent finish, ideal for aesthetic applications.
Offers strong adhesion and long-lasting results, even in extreme conditions.
Solvent-free formula, making it safer to use.

Cons

Requires proper surface preparation for optimal adhesion.
May not be suitable for very heavy or load-bearing applications without additional support.
The initial curing time may require clamping or support for certain applications.

Setup, Compatibility & Care

Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose particles. For best results, lightly sand non-porous surfaces.
Application: Apply the adhesive to one surface in a zig-zag pattern or dots.
Assembly: Immediately press the two surfaces together.
Support: For heavier items, provide support or clamping until the adhesive cures.
Clean Up: Remove any excess adhesive with a damp cloth before it dries.

Compatibility:

Suitable for: Wood, glass, plastics, brick, tile, stone, ceramic, and metal.
Not recommended for: Continuously submerged applications.

Care:

Store in a cool, dry place.
Avoid direct sunlight.