Finish Line Ceramic Wet Lube - 60 ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Finish Line Ceramic Wet Lube is designed for serious cyclists who face harsh, wet riding conditions and demand maximum drivetrain efficiency. By leveraging ceramic-bonding technology and synthetic racing oils, it provides superior protection against corrosion and wear while ensuring quiet, precise shifting. While it excels in durability, users should note that as a wet lube, it requires more careful application to avoid over-lubricating, which can attract debris if not wiped properly.
All features
| Model Part Number | QPCWT0212 |
|---|---|
| Brand | Finish Line |
Extended Product Information
FAQs
Can I use this on my mountain bike?
Yes, it is excellent for mountain bikes, especially in wet or muddy conditions.
How often should I reapply?
Reapplication frequency depends on conditions, but due to the ceramic technology, you will likely find you can go longer between applications compared to standard wet lubes.
Do I need to degrease before every application?
No, you only need to fully degrease before the first use. For subsequent applications, simply wipe the chain clean before applying.
Is this safe for carbon fiber components?
Yes, it is safe for all standard bicycle drivetrain materials.
Does it contain wax?
No, this is a 100% synthetic oil-based lubricant infused with ceramic and fluoropolymers.
Can I use this for indoor trainer rides?
While it works, it is technically overkill for indoor use; however, it will keep the drivetrain very quiet.
Troubleshooting
Chain is attracting too much dirt
You are likely applying too much lubricant. Apply sparingly to the rollers only, then wipe the exterior of the chain thoroughly with a rag.
Drivetrain feels sluggish or sticky
Excessive buildup of old lube and dirt may be present. Use a dedicated bicycle chain degreaser to strip the chain completely before reapplying a fresh, thin layer.
Pros and Cons
Pros
- Significantly reduces drivetrain noise
- Provides excellent rust and corrosion protection
- Ceramic coating improves shifting smoothness
- Long-lasting formula ideal for wet weather
- Reduces the buildup of contaminants over time
Cons
- Requires careful wiping to prevent excess buildup
- Not intended for ultra-dry or dusty race conditions
- Slightly higher price point than basic mineral-based lubes
Setup, Compatibility & Care
To achieve optimal performance, ensure your drivetrain is completely degreased before the first application, especially if switching from a different type of lubricant.
- Shake the bottle well to ensure the ceramic particles are evenly distributed.
- Apply a thin, steady stream of lube to the inside of the chain rollers while back-pedaling the crank.
- Let the lube penetrate for a few minutes.
- Thoroughly wipe the exterior of the chain with a clean, lint-free cloth to remove excess lube.
This product is compatible with all bicycle chains, including road, mountain, and e-bike drivetrains. Store in a cool, dry place and ensure the cap is tightly closed after use to prevent the synthetic oils from degrading.