Isopon Knifing Putty - 100ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to repair minor damage to their vehicle's paintwork using Isopon Knifing Putty. It's designed for easy application and provides a smooth finish, ideal for filling stone chips and scratches. However, it's best suited for minor imperfections; deep damage may require professional attention.
All features
| Model Part Number | KP/100 |
|---|---|
| Brand | Isopon |
Extended Product Information
FAQs
How long does it take for the putty to dry?
Drying time typically ranges from 30 minutes to an hour, but always refer to the product instructions for specific guidance based on environmental conditions.
Can I use this on plastic bumpers?
Yes, Isopon Knifing Putty is generally compatible with plastic bumpers. However, always test in an inconspicuous area first to ensure adhesion.
What kind of tools do I need?
You'll need a filling knife or similar tool for application, sandpaper, and potentially a degreaser.
Do I need to prime after using the putty?
Yes, after sanding, it is recommended to apply a primer before painting. This will help the paint adhere properly.
Can I use this on rust?
No, this product is designed for filling. Rust should be removed and treated before applying the putty.
How should I store the putty?
Store the putty in a cool, dry place. Make sure the lid is securely closed to prevent it from drying out.
What if I apply too much putty?
You can sand away the excess putty after it dries to achieve a smooth finish.
Troubleshooting
Putty is not adhering to the surface.
Ensure the surface is clean, degreased, and properly prepared. Lightly sand the area to provide a better key.
Putty is shrinking excessively after drying.
Apply the putty in thin layers. Avoid applying too much putty at once.
Difficulty sanding the putty.
Ensure the putty is completely dry before sanding. Use progressively finer grades of sandpaper.
Pros and Cons
Pros
- Easy to apply, even for beginners.
- Provides a smooth surface for refinishing.
- Ready-to-use formula saves time.
- Cost-effective solution for minor damage.
- Can be used on various surfaces.
Cons
- Not suitable for deep or extensive damage.
- Requires sanding and potentially painting after application.
- May shrink slightly upon drying.
- Color matching may be required.
- Requires proper surface preparation for best results.
Setup, Compatibility & Care
- Preparation: Clean the damaged area thoroughly, removing any loose paint, rust, or debris. Use a degreaser to remove any wax or silicone.
- Application: Using a filling knife or similar tool, apply the putty to the damaged area, slightly overfilling to allow for sanding.
- Drying: Allow the putty to dry completely according to the manufacturer's instructions, typically around 30 minutes to an hour depending on conditions.
- Sanding: Once dry, sand the surface smooth using progressively finer grades of sandpaper until it matches the surrounding paintwork.
- Compatibility: Suitable for use on most common automotive surfaces like steel, aluminum, and primed plastic. Always test in an inconspicuous area first if unsure.
- Care: Store the product in a cool, dry place. Ensure the lid is securely closed after use to prevent drying out.