Walltastic Motocross Wall Mural - Multicolor
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to transform a child's room with the Walltastic Motocross Wall Mural. The key benefit is the ability to easily add a striking visual element to a bedroom, nursery, or playroom. Keep in mind that the mural requires application with wallpaper paste and follows a specific installation method.
All features
| Colour | Multicolor |
|---|---|
| Brand | Walltastic |
Extended Product Information
FAQs
What tools do I need?
You will need wallpaper paste, a soft cloth, and a trimming tool.
Can I reposition the panels after they are applied?
It's best to position the panels correctly during application. While slight adjustments may be possible, it's easier to achieve a good finish if positioned correctly the first time.
What type of wall is suitable for this mural?
The mural is suitable for most smooth, clean, and dry wall surfaces.
How do I clean the mural?
You can wipe the surface gently with a damp cloth.
What is the pattern match?
The pattern match is straight with an overlap.
What method of application is used?
Paste the Paper.
Troubleshooting
Panels not adhering properly.
Ensure sufficient paste is applied and the panel is pressed firmly onto the wall. Check for any air bubbles and smooth them out.
Seams are visible after drying.
Make sure you have overlapped the panels by approximately 6mm and that the edges are properly aligned before they dry.
Pros and Cons
Pros
- Easy to apply with provided instructions
- Adds a significant visual impact to the room
- Suitable for various spaces, including bedrooms, nurseries, and playrooms
Cons
- Requires wallpaper paste for application
- Overlap of 6mm is needed at the seams
- Trimming of excess edges is required after drying
Setup, Compatibility & Care
- Preparation: Ensure the wall surface is clean, dry, and smooth before applying the mural.
- Panel Selection: Select the first panel and lay it face down.
- Pasting: Apply wallpaper paste evenly to the back of the panel.
- Soaking: Allow the paste to soak for 1-2 minutes.
- Application: Apply the panel to the wall using a soft cloth.
- Repeating: Repeat these steps for the remaining panels.
- Overlapping: Overlap all joining edges by approximately 6mm.
- Trimming: Trim excess edges carefully after drying.