Rust-Oleum Floor Tile Paint - Hessian - Matt Finish

Make an entrance! Rust-Oleum Washable Matt Floor Tile Paint is an ultra durable, water-resistant a...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners seeking to refresh their tiled floors quickly and easily with Rust-Oleum Floor Tile Paint. The key benefit is a durable, water-resistant finish that adheres directly to tiles without the need for stripping, sanding, or priming. However, the mixed paint must be used within 5 days of activation. This guide covers everything from application to troubleshooting, ensuring a successful and long-lasting result.

All features

ColourBeige
BrandRust-Oleum

Extended Product Information

FAQs

How long does the paint last?

With proper preparation and care, the paint is designed to last for a long time. The actual lifespan depends on the amount of foot traffic and wear the floor experiences.

Can I use this paint on walls?

No, this paint is specifically designed for floor tiles. Using it on walls is not recommended.

How do I clean the painted surface?

Use a mild detergent and water. Avoid abrasive cleaners or scrubbing pads.

What if I need to touch up the paint?

Clean the area to be touched up, and apply a thin coat of the mixed paint.

What is the coverage per can?

Coverage depends on the surface and application method. Refer to the product label for specific coverage details.

What should I do if I spill the paint?

Clean up spills immediately with a damp cloth. Make sure to remove any excess paint before it dries.

Can I apply this paint over existing paint?

Yes, but ensure the existing paint is in good condition and the surface is properly prepared.

Troubleshooting

Paint is not adhering properly.

Ensure the surface was properly cleaned and free of contaminants before application. Lightly sand glossy tiles to improve adhesion.

Paint is not drying evenly.

Apply thinner, even coats. Avoid applying too much paint at once. Ensure the room has good ventilation.

Paint shows scratches or scuffs easily.

Allow the paint to fully cure (7 days). Avoid dragging heavy objects across the floor.

Pros and Cons

Pros

  • Easy to apply, saving time and effort.
  • Provides a durable and water-resistant finish.
  • No primer or sanding required.
  • Available in a range of colors.
  • Ideal for kitchens, bathrooms, and high-traffic areas.

Cons

  • Must be used within 5 days of mixing with activator.
  • Not available in a tester sachet.
  • Requires proper surface preparation for optimal adhesion.
  • Delivery is Monday to Friday only.

Setup, Compatibility & Care

  1. Preparation: Clean the tiled surface thoroughly. Remove any dirt, grease, or previous coatings. Ensure the surface is completely dry.
  2. Mixing: Add the activator to the paint base and stir thoroughly until the mixture is uniform. Use the mixed paint within 5 days.
  3. Application: Apply the paint evenly using a brush or roller. Two coats are recommended for full coverage, allowing 4 hours drying time between coats.
  4. Compatibility: Suitable for ceramic and stone tiled floors. Not recommended for areas with standing water or constant submersion.
  5. Care: Clean spills immediately. Regular cleaning with a mild detergent and water is recommended. Avoid abrasive cleaners.