This is a rosin based flux with non-corrosive residue, weighing 40g. Manufactured by JUFENG.
Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone using the CLIFF 6.35mm Mono Solder Switched Jack Socket - CL1298A, a reliable component for audio connections. The key benefit is its robust construction and solderability, ensuring secure and lasting connections. A potential caveat is the need for soldering skills for proper installation. This guide covers setup, use, and troubleshooting to help you get the most out of this jack socket.
| Model Part Number | CL1298A |
|---|---|
| Brand | CLIFF |
Use a rosin-based flux for soldering to ensure clean, non-corrosive connections.
It accepts standard 6.35mm (1/4 inch) mono audio plugs.
The switched function can be used to activate or deactivate a circuit when a plug is inserted, useful in many audio applications.
The socket is typically mounted to a panel or chassis using appropriate hardware (not included).
No, this is a mono jack socket designed for mono audio signals only.
Protect the socket from moisture to prevent corrosion and ensure proper function. If it gets wet, allow it to dry completely before use.
Good solder joints should be shiny, smooth, and have a good connection to the terminal. Avoid cold joints, which are dull and not properly bonded.
Check the solder connections. Ensure they are secure and free of cold joints or shorts. Verify that the plug is fully inserted.
Double-check the wiring of the switch terminals. Ensure the switch mechanism is functioning correctly. Verify the signal is correct.
Inspect the solder joints for any cold joints or shorts. Ensure the wires are properly connected and not frayed. Check for any corrosion on the terminals.
Care:
