Fix All High Tack Adhesive - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Soudal Fix All High Tack Adhesive is a professional-grade, single-component sealant and adhesive designed for builders, contractors, and DIY enthusiasts who require an immediate, high-strength bond across diverse materials. Its primary benefit is a high initial tack that eliminates the need for mechanical fasteners like nails or screws during the curing process, though users should note that surfaces must be clean and free of dust to ensure optimal adhesion.
All features
| Colour | White |
|---|---|
| Model Part Number | 101444 |
| Brand | Soudal |
Extended Product Information
FAQs
Can I use Fix All High Tack outdoors?
Yes, it is weather-resistant and designed for both interior and exterior applications.
Is it safe to use on glass?
Yes, Fix All High Tack provides an excellent bond to glass surfaces.
Can I paint over the sealant?
Yes, this product is compatible with all common water-based paints.
Does this adhesive require nails or screws?
One of its key features is its high initial tack, which often removes the need for mechanical fasteners.
How long does it take to cure?
Curing speed depends on temperature and humidity, but it is formulated for fast curing compared to traditional sealants.
What should I do if I get adhesive on my skin?
Wipe off excess with a cloth and wash the area thoroughly with soap and water.
Troubleshooting
Adhesive is not sticking to the surface
Verify that the surface is clean and free of grease, dust, or loose particles; clean with an appropriate degreaser before re-application.
Product is difficult to dispense from the cartridge
Ensure the nozzle is cut at the correct angle and size; if the material is cold, warming the cartridge slightly to room temperature can improve flow.
Pros and Cons
Pros
- Eliminates the need for mechanical fasteners
- Provides instant grab for vertical applications
- Compatible with a vast array of building materials
- Weather-resistant for internal and external use
- Can be painted over after curing
Cons
- Requires clean, grease-free surfaces to function
- Not suitable for use on certain low-energy plastics like PE or PP
- Excess adhesive must be cleaned while wet as it is difficult to remove once cured
Setup, Compatibility & Care
Before application, ensure that all surfaces are load-bearing, clean, dry, and free of dust or grease. Apply the adhesive using a standard caulking gun in beads or dots spaced at regular intervals. For optimal bond strength on non-porous surfaces, ensure the adhesive is applied in a way that allows air circulation if necessary. Once applied, clean any excess material immediately using a damp cloth or solvent, as the cured material is extremely difficult to remove. Store the cartridge in a cool, dry place and reseal the tip after every use to prevent the product from curing inside the nozzle.