UltraTile Proflex S2 - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using UltraTile ProFlex S2 in white, a high-performance tile adhesive. It provides superior adhesion and flexibility, perfect for challenging environments. Note that accurate application and adherence to guidelines are crucial for optimal results. This rapid-setting, fibre-reinforced adhesive is ideal for various tile types and applications, offering a strong and durable bond for both walls and floors.
All features
| Colour | White |
|---|---|
| Brand | UltraTile |
Extended Product Information
FAQs
What is the pot life of UltraTile ProFlex S2?
The pot life is approximately 40 minutes.
How long does it take for UltraTile ProFlex S2 to set?
The setting time is approximately 3.5 hours.
What types of tiles can I use with this adhesive?
You can use ceramic, porcelain, and mosaic tiles.
Is UltraTile ProFlex S2 suitable for external use?
Yes, it is frost-resistant, making it suitable for both internal and external applications.
Can I use this adhesive with underfloor heating?
Yes, it is suitable for use with underfloor heating systems.
What is the bed thickness range?
The bed thickness can range from 3mm to 20mm.
How much adhesive do I need?
Coverage is approximately 4.5kg per m2 for a 3mm bed.
How should I store the adhesive?
Store in unopened bags in cool, dry conditions.
Troubleshooting
Tiles are not adhering properly.
Ensure the surface is clean, and the adhesive was mixed correctly. Check the expiry date of the adhesive. Verify that the correct trowel size was used and that the tiles were placed within the pot life.
Adhesive is setting too quickly.
Ensure the ambient temperature is within the recommended range. Avoid mixing too much adhesive at once, given the short pot life.
Cracking in the tile grout lines.
Make sure that adequate movement joints were incorporated. Check for any excessive movement in the substrate. Ensure the adhesive has fully cured.
Pros and Cons
Pros
- Rapid setting time reduces project downtime.
- Suitable for a wide range of applications, including timber floors and underfloor heating.
- Excellent flexibility minimizes cracking and ensures long-lasting results.
- Versatile for both internal and external use.
Cons
- Pot life is approximately 40 minutes, requiring careful planning and quick application.
- Requires proper surface preparation for optimal adhesion.
- Shelf life is limited to 12 months after the manufacturing date.
- Coverage rate varies depending on the bed thickness, so careful calculations are needed.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free of any contaminants that could affect adhesion.
- Mixing: Mix the 20kg bag with the recommended amount of water until a smooth, lump-free consistency is achieved. Allow to stand for a few minutes and remix.
- Application: Apply using a notched trowel suitable for the tile size and desired bed thickness (3mm-20mm).
- Tiling: Place tiles within the pot life.
Compatibility
- Compatible with ceramic, porcelain, and mosaic tiles.
- Suitable for use with underfloor heating systems.
- Ideal for areas subject to movement or vibration.
Care
- Store unopened bags in a cool, dry place.
- Use within 12 months of the manufacturing date.
- Always adhere to British/European standards for tiling.
- Incorporate movement joints as specified.