The Big Cheese Pest Foam - 400Ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Big Cheese Pest Foam is designed for homeowners seeking a reliable method to block entry points for rodents like rats and mice. Its key benefit is creating a rapidly expanding, durable foam barrier that seals gaps and cracks effectively. A potential caveat is that for very large holes, it may require combination with other products like wire wool for a complete seal.
All features
| Model Part Number | STV251 |
|---|---|
| Brand | The Big Cheese |
Extended Product Information
FAQs
Is The Big Cheese Pest Foam safe for pets and children?
Once the foam has fully cured (typically within 24 hours), it is non-toxic and safe for use in homes with pets and children. Ensure they do not come into contact with the uncured foam.
How long does the foam take to dry and harden?
Drying and curing times can vary depending on ambient temperature and humidity, but it generally takes around 24 hours to fully harden. Check the product packaging for specific curing times.
Can I use this foam for larger holes?
For larger holes (over 2-3 cm), it is recommended to first fill the majority of the void with a material like The Big Cheese Wire Wool Rodent Blocker Kit (STV250) and then use the Pest Foam to seal the remaining smaller gaps around the filler.
How much area can one can cover?
Coverage varies depending on the size of the gaps being filled. A 400ml can is typically sufficient for sealing multiple small to medium-sized gaps. Refer to the product instructions for estimated coverage.
Can I paint or decorate over the foam once it's cured?
Yes, once the foam is fully cured and hardened, you can trim any excess and then paint, plaster, or decorate over it to match your surroundings.
What should I do if I get uncured foam on my skin or clothing?
If uncured foam comes into contact with skin, wash immediately with plenty of soap and water. For clothing, try to wipe away excess uncured foam before it hardens. Cured foam is very difficult to remove.
Troubleshooting
Foam not expanding sufficiently
Ensure the can was shaken vigorously for at least 30 seconds before use. Check the temperature; it performs best within the recommended temperature range on the can.
Foam expands too much and creates a mess
Apply in shorter bursts and do not fill more than 50% of the void. Have a damp cloth or waste bag ready for immediate cleanup of excess uncured foam.
Cured foam is difficult to remove
Cured foam is very hard. If trimming is needed, use a sharp knife carefully. For skin contact, wash immediately with soap and water; for clothing, attempt to remove uncured foam before it hardens.
Rodents are still finding a way in
Check if all potential entry points have been sealed. For larger holes, ensure it was used in conjunction with a suitable filler like wire wool. Inspect the seal for any cracks or gaps that may have formed during curing.
Pros and Cons
Pros
- Effectively seals small to medium-sized gaps and cracks.
- Creates a solid, rodent-proof barrier.
- Non-toxic and safe for household use after curing.
- Easy to apply with the included nozzle.
- Can be used in conjunction with other blocking materials for larger openings.
Cons
- May not be sufficient alone for very large holes; requires additional materials.
- Expansion can be significant, requiring careful application to avoid overfilling.
- Requires ventilation during application and curing.
- Can be messy if not applied carefully.
Setup, Compatibility & Care
Setup:
- Ensure the area to be sealed is clean, dry, and free of debris.
- Shake the can well before use.
- Attach the extension tube if required for deeper application.
- Apply the foam into the gap, filling only about 50% as it will expand.
- Allow the foam to cure fully according to product instructions (typically 24 hours).
- Once cured, any excess foam can be trimmed with a knife, and the area can be painted or decorated if desired.
Compatibility:
This foam is suitable for use in most domestic applications, including walls, floors, and around pipes. It is designed to adhere to common building materials such as brick, concrete, wood, and plaster.
Care:
Store the can in a cool, dry place away from direct sunlight and heat. Keep out of reach of children and pets. Clean any uncured foam from surfaces immediately with a damp cloth or appropriate solvent as recommended on the can. Cured foam is difficult to remove.