Mapei Ultimate Shower Proof Tile Adhesive - Cream - 15kg
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to install ceramic or mosaic tiles in wet areas like bathrooms and showers. The Mapei Ultimate Shower Proof Tile Adhesive offers a strong, water-resistant bond with a high grab, making tile installation easier. Keep in mind that this adhesive is suitable for tiles up to 600 x 300mm in size.
All features
| Colour | Cream |
|---|---|
| Brand | Mapei |
Extended Product Information
FAQs
What is the coverage area of a 15kg tub?
Coverage varies based on the size of the tiles and the thickness of the adhesive layer. Consult the product packaging for specific coverage details.
Can I use this adhesive on floors?
This adhesive is designed primarily for walls. Check the product specifications to confirm if it is suitable for your specific floor tile application.
How long does it take for the adhesive to fully cure?
Full curing typically takes several days to a week, depending on environmental conditions. Grouting can be done after 24 hours, but avoid heavy use until the adhesive is fully cured.
What type of trowel should I use?
A notched trowel is recommended to ensure even application and proper adhesion. The notch size depends on the tile size; consult the product instructions for the correct size.
Can I use this adhesive on painted surfaces?
It is generally recommended to remove paint before applying the adhesive. The adhesive may not adhere well to painted surfaces.
Is this adhesive suitable for use with underfloor heating?
Check the product specifications to ensure the adhesive is compatible with underfloor heating systems. Some adhesives may not be suitable for this application.
How should I store the adhesive?
Store the adhesive in a cool, dry place, away from direct sunlight and extreme temperatures. Reseal the container tightly after each use.
Troubleshooting
Tiles are slipping or sliding after application.
Ensure the surface is level and clean. Apply sufficient adhesive to the back of the tiles and press firmly into place. If necessary, use tile spacers to maintain the position of the tiles while the adhesive sets.
Adhesive is not setting properly.
Check the expiration date of the adhesive. Ensure the adhesive is being applied within the recommended temperature range. Make sure the surface is not too porous or wet before application.
Pros and Cons
Pros
- Easy to use due to its ready-mixed formulation.
- Provides a strong, water-resistant bond.
- Offers a high grab to prevent tile movement during installation.
- Allows for quick grouting, minimizing project downtime.
- Suitable for use in both domestic and commercial wet areas.
Cons
- Only suitable for tiles up to 600 x 300mm in size.
- May require more careful application to ensure even coverage.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free of dust or debris.
- Apply the adhesive evenly to the back of the tile using a notched trowel.
- Press the tile firmly into place.
- Maintain appropriate spacing between tiles for grout lines.
- Allow 24 hours for the adhesive to set before grouting.
Compatibility:
- Compatible with ceramic and mosaic tiles.
- Suitable for use in showers, bathrooms, and other wet areas.
- Best results are achieved on stable, properly prepared surfaces.
Care:
- Clean up any adhesive spills immediately with water while the adhesive is still wet.
- Avoid harsh chemicals or abrasive cleaners after the adhesive has cured.
- Follow the tile manufacturer's care instructions for cleaning the tiles themselves.