Loops IDC Strip - 237B - Grey - 10 Pair
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for network technicians and installers working with structured cabling systems. The Loops IDC Strip 237B provides a reliable and efficient method for connecting 10 pairs of wires, simplifying complex installations. A potential caveat is the specific compatibility with 105mm width mount frames, requiring verification before purchase. This product is designed for easy push-on termination onto mount frames, featuring individual IDC ports for clean and secure connections.
All features
| Model Part Number | 237B |
|---|---|
| Brand | Loops |
Extended Product Information
FAQs
What does IDC stand for?
IDC stands for Insulation Displacement Connector. It's a type of electrical connection that pierces the insulation of a wire to make contact, eliminating the need for stripping the wire first.
Can I use stranded wire with these strips?
Yes, the Loops IDC Strip 237B supports stranded wires within the range of 7/0.15 to 7/0.25 (19-26 AWG).
How many total wires can one strip terminate?
Each strip has 10 pairs, meaning it can terminate 20 individual wires (20 incoming and 20 outgoing).
What is the purpose of the test points?
Test points allow for electrical testing (e.g., continuity checks) of individual connections without disrupting the main termination. This is useful for troubleshooting and verification.
Are these strips suitable for outdoor use?
No, these IDC strips are designed for indoor, dry environments. They are not rated for exposure to moisture, extreme temperatures, or outdoor conditions.
What tools are needed for installation?
A standard IDC termination tool is required to properly seat the wires into the insulation displacement contacts.
What is the warranty period for Loops IDC Strips?
Please refer to the product packaging or Loops' official documentation for specific warranty information, as it may vary.
Troubleshooting
No connectivity on a specific pair
Verify the wire has been fully seated in the IDC port using a termination tool. Check for any damage to the wire or the IDC contact. Use the test point to check for continuity.
Poor signal quality or intermittent connection
Ensure the correct wire gauge is used for the IDC termination. Re-terminate the connection, applying firm and even pressure with the tool. Check for any corrosion or debris on the contacts.
Strip does not seat properly on the mount frame
Confirm the mount frame is precisely 105mm in width. Ensure there are no obstructions on the frame or the strip's mounting clips. Apply steady pressure during installation.
Pros and Cons
Pros
- Efficient termination using IDC technology speeds up installations.
- Built-in test points simplify troubleshooting and testing.
- Durable materials ensure long-lasting performance.
- Versatile wire size compatibility handles various cable types.
- Designed for standard mount frames, ensuring good integration.
Cons
- Requires 105mm width mount frames, limiting compatibility with non-standard sizes.
- Primarily for solid core wiring, though it supports some stranded gauges.
- Not designed for outdoor or harsh environmental conditions without additional protection.
Setup, Compatibility & Care
Setup: The Loops IDC Strip 237B is designed for easy installation. Align the strip with a 105mm width mount frame. Push the strip firmly onto the frame; the connections will snap into place. Use a suitable IDC termination tool to press down the wires into the IDC ports, ensuring a secure connection. For each wire, insert it into the designated port and apply firm, consistent pressure with the tool to seat the conductor and displace the insulation.
Compatibility: This IDC strip is specifically designed for mount frames with a 105mm width. It is compatible with solid core wires ranging from 0.4mm to 0.9mm in diameter and stranded wires from 7/0.15 to 7/0.25 (19-26 AWG).
Care: These strips are intended for indoor, dry environments. To maintain performance, keep the terminations clean and free from dust and moisture. Avoid exposing the strips to excessive heat or direct sunlight. Cleaning can be done with a dry, lint-free cloth. Do not use liquid cleaners directly on the contacts.