Viva Decor Inka Gold Metallic Wax Paste - Old Silver
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This metallic wax paste is ideal for crafters and DIY enthusiasts looking to add an elegant metallic sheen to absorbent surfaces like untreated wood, cardboard, and unglazed pottery. Its key benefit is its easy, rub-on application that provides a rich, elegant finish. A potential caveat is that it is designed for absorbing surfaces, so results may vary on non-porous materials. The product offers a water-based, rub-on formula with a beautiful metallic shine.
All features
| Model Part Number | 120490936 |
|---|---|
| Brand | Viva Decor |
Extended Product Information
FAQs
What types of surfaces is Viva Decor Inka Gold best for?
It is best suited for absorbent surfaces such as untreated wood, cardboard, paper mache, and unglazed pottery. It adheres well to these materials.
How do I apply the wax paste?
Apply with a sponge, damp cloth, finger, or slightly moistened brush using a circular buffing motion, polishing as you apply. For more intense color, apply multiple thin layers.
Can I use this on non-absorbent surfaces?
While it may adhere to non-absorbent surfaces, its performance and finish might be inconsistent. It is designed to work best with materials that can absorb the wax paste.
How can I make the finish more durable?
The wax paste can be sealed with a varnish or other suitable sealant after it has dried to increase its durability and protect it from wear.
How do I clean my tools after using the wax paste?
Clean your brushes, sponges, and cloths with soap and water while the wax paste is still wet.
What is the best way to achieve a more intense metallic color?
Apply several thin layers of the wax paste. Allow each layer to dry sufficiently before applying the next, and buff after each application for maximum sheen.
Can I mix different colors of Inka Gold wax paste?
Yes, Viva Decor Inka Gold wax pastes can be mixed to create custom metallic shades.
Troubleshooting
Wax paste appears dry or difficult to spread
Ensure the lid is tightly sealed when not in use. If slightly dry, try adding a tiny drop of water or specialized thinner (if recommended by the manufacturer) and mix thoroughly. Always use a clean tool to remove paste from the jar.
Uneven or streaky metallic finish
Apply thinner layers and allow them to dry partially before buffing. Ensure you are polishing consistently with a soft cloth or sponge. For larger areas, practice the buffing technique to achieve an even coverage.
Lack of shine or dull appearance
Ensure you are buffing the surface adequately after application to bring out the metallic luster. If the surface is not absorbent enough, the wax may not adhere or polish effectively. Consider a second layer and more vigorous buffing.
Wax rubs off after drying
This can happen if the surface is not sufficiently absorbent or if not enough wax was applied and buffed. Ensure the surface is properly prepared. Apply additional thin layers and buff thoroughly. For lasting results, seal the finish with a varnish.
Pros and Cons
Pros
- Easy to apply with a simple rub-on technique.
- Creates a beautiful and elegant metallic finish.
- Adheres well to porous materials like wood and cardboard.
- Builds color intensity with multiple layers.
- Can be used for both large areas and intricate details.
Cons
- Best suited for absorbent surfaces; may not perform as well on non-porous materials.
- Requires separate sealing for maximum durability.
- May require practice to achieve perfectly smooth results on large areas.
- Direct application from the jar is not recommended to prevent contamination.
Setup, Compatibility & Care
Setup: No complex setup is required. Ensure the surface you wish to decorate is clean, dry, and free from dust or grease. For best results, use on absorbent materials like untreated wood, cardboard, or unglazed ceramics.
Application:
- Use a clean palette knife to remove a small amount of wax paste from the jar; do not dip tools directly into the jar.
- Apply the paste to the surface using a sponge, soft cloth, finger, or a slightly dampened brush.
- Work the paste into the surface using a circular buffing motion, applying and polishing simultaneously.
- For a more intense color, allow each thin layer to dry before applying the next.
- For detailed areas or 3D objects, use a lightly moistened brush and polish the surface once it has dried.
Compatibility: This wax paste is specifically designed for absorbent surfaces. It adheres well to untreated wood, cardboard, paper mache, and unglazed pottery. Results may be less effective or require different application techniques on non-porous surfaces such as plastic, metal, or sealed wood.
Care:
- To clean tools, use soap and water while the paste is still wet.
- Seal the finished project with a suitable varnish or sealant for added protection and durability, especially if the item will be handled frequently or exposed to moisture.
- Store the wax paste in its original container with the lid tightly closed in a cool, dry place to maintain its consistency and prevent drying out.