Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and renovators looking for a stylish, low-maintenance, and waterproof solution for their bathrooms. The Multipanel Classic Riven Slate panel offers the aesthetic appeal of natural slate with the ease of installation and upkeep of modern wall panels, eliminating the need for grout. A key benefit is its fully waterproof construction and a 30-year guarantee. One caveat to consider is its specific dimensions, requiring careful planning for coverage.
| Model Part Number | MP2859STDHLTG17 |
|---|---|
| Brand | Multipanel |
The primary advantage is the elimination of grout. This makes them quicker to install, easier to clean, and more hygienic as there are no grout lines to trap mold or mildew.
Yes, the Riven Slate finish can add depth and a natural element to any size bathroom. Its realistic replication of slate can make a bold statement.
Panels can be cut using a fine-toothed saw. For cut-outs (like for pipes), a jigsaw can be used. Always measure carefully and make cuts on the back of the panel where possible.
Multipanel recommends using their specifically formulated waterproof adhesive for best results and to maintain warranty coverage.
It is generally recommended to remove existing tiles to ensure a sound, flat surface for installation. However, if the existing tiles are firmly adhered and the surface is perfectly flat, some installers may proceed with appropriate preparation and adhesive.
The dimensions are 2400mm in height and 598mm in width.
Multipanel Classic bathroom wall panels come with a 30-year guarantee.
Ensure no debris is present in the groove or on the tongue. Check if the panel edge has been damaged during cutting. Trim away any obstructions gently.
Verify the wall surface is clean, dry, and free from dust or grease. Ensure the correct type and amount of adhesive have been used as per manufacturer guidelines. Allow adequate curing time.
The joint may not have been sealed properly. Re-apply sealant to the joint if necessary. If the Hydro-Lock connection is compromised, the panels may need to be removed and re-fitted with proper sealing.
You may be using a harsh cleaner or not rinsing thoroughly. Use only mild, non-abrasive detergents and rinse well with clean water, then dry with a soft cloth.
Setup: Ensure walls are clean, dry, and sound before installation. Panels are typically cut using a fine-toothed saw. Apply Multipanel's recommended waterproof adhesive to the back of the panel or the wall, following manufacturer instructions. Engage the Hydro-Lock tongue and groove system to connect panels securely. Use appropriate sealant around edges and penetrations (like pipes or shower heads). Black or silver corner and end extrusions are recommended for a clean, professional finish.
Compatibility: These panels are designed for interior bathroom and wet room applications. They are compatible with standard bathroom fixtures and can be installed over existing tile backer boards or directly onto studs (if structural requirements are met). Ensure you use Multipanel's own brand of adhesives and sealants for optimal performance and warranty compliance.
Care: Clean the panels regularly with a soft, damp cloth and a mild, non-abrasive detergent. Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the panel's surface. Rinse thoroughly with clean water and dry with a soft cloth. Promptly wipe up any spills or condensation to maintain the surface.
