Onedin Picture Light - Bronze
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to enhance their artwork with the Onedin 2 Light Picture Light in Bronze. It provides elegant and focused illumination, making your pictures stand out. Keep in mind that this light requires two E14 pygmy lamps, which are not included.
All features
| Colour | Bronze |
|---|---|
| Brand | Dar Lighting |
Extended Product Information
FAQs
What type of bulbs does the Onedin picture light use?
The Onedin picture light uses two E14 (SES) pygmy lamps.
Are the bulbs included?
No, the bulbs are not included and must be purchased separately.
Is the light dimmable?
Yes, the light is dimmable when used with dimmable E14 pygmy lamps.
What is the maximum wattage for the bulbs?
The maximum wattage for each bulb is 25W.
What is the IP rating of the Onedin picture light?
The IP rating is 20, which means it is protected against solid objects larger than 12.5mm.
How do I clean the picture light?
Use a soft, dry cloth to clean the bronze finish.
What is the product class?
The product class is 1 - Earthed.
What are the dimensions of the picture light?
The height is 180mm, the width is 370mm, and the depth is 140mm.
Troubleshooting
Light does not turn on.
Check the power connection and ensure the rocker switch is in the 'on' position. Also, verify that the bulbs are correctly installed.
Bulb is flickering.
Try replacing the bulbs with new ones. If the issue persists, check the wiring for any loose connections or consult a qualified electrician.
Light is not dimming.
Confirm that you are using dimmable bulbs and that the dimmer switch is compatible with the light.
Pros and Cons
Pros
- Elegant bronze finish enhances any decor.
- Adjustable head for focused lighting.
- Easy to use with a built-in rocker switch.
- Accommodates two bulbs for bright illumination.
Cons
- Requires separate purchase of E14 pygmy lamps.
- Installation requires some basic electrical knowledge.
- Bulb replacement may be necessary over time.
Setup, Compatibility & Care
Setup
- Mounting: Use the provided fixing plate (2.6cm x 9cm) to attach the light to the wall.
- Wiring: Connect the wires according to the electrical safety regulations. (Note: Professional installation is recommended.)
- Bulb Installation: Insert two E14 pygmy lamps (25W max) into the lamp holders. Ensure the bulbs are securely in place.
- Testing: Turn on the light using the rocker switch to confirm it is working correctly.
Compatibility
- Bulbs: Compatible with E14 (SES) pygmy lamps, with a maximum wattage of 25W per bulb.
- Dimmers: Dimmable when using dimmable lamps.
Care
- Cleaning: Use a soft, dry cloth to clean the bronze finish. Avoid abrasive cleaners.
- Bulb Replacement: Always turn off the power before replacing the bulbs. Allow the bulbs to cool before handling.
- Safety: Ensure the light is installed in a dry environment.