Tim Holtz Archival Re-Inker - Light House
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for crafters and artists using Tim Holtz Archival Ink Pads. The key benefit is achieving permanent, crisp stamped images that resist water-based mediums, ensuring your designs stay vibrant. A potential caveat is that while permanent on many surfaces, its behavior can vary. This product is a .5 oz bottle of Archival Ink designed to refill Tim Holtz Archival Dye Inkpads, providing lasting stamping results that are permanent and waterproof.
All features
| Model Part Number | ARR70832 |
|---|---|
| Brand | Tim Holtz |
Extended Product Information
FAQs
What is the primary purpose of the Tim Holtz Archival Re-Inker?
The primary purpose is to re-ink and revive Tim Holtz Archival Dye Ink Pads when they begin to dry out, ensuring consistent and permanent stamping results.
Is the 'Light House' ink color permanent on all surfaces?
The ink provides permanent results on many surfaces, but permanence can vary depending on the porosity and type of material. It is designed to be permanent and waterproof on most crafting surfaces like paper and cardstock.
How long does it take for the ink to become waterproof?
Once stamped and allowed to dry completely, the ink is waterproof. Drying time can vary, but generally, 15-30 minutes is sufficient in average conditions before applying water-based mediums.
Can I use this re-inker for Distress Ink pads?
No, this Archival Re-Inker is specifically formulated for Tim Holtz Archival Dye Ink Pads. Distress Ink pads use a different ink formula and require their own specific re-inkers.
What does 'acid-free' mean for this ink?
Acid-free means the ink does not contain acidic components that can cause paper to yellow or degrade over time, making it ideal for archival and scrapbooking projects where longevity is important.
How much ink is in one bottle?
Each bottle contains 0.5 oz (approximately 15ml) of Archival Ink.
Can I mix different colors of Archival Re-inkers?
While you can re-ink a pad with a different color, it's generally recommended to use the re-inker that matches the original ink pad color for the most predictable results. Mixing can create muddy colors if not done carefully.
Troubleshooting
Ink pad is not saturated enough after re-inking
Allow more time for the ink to absorb into the pad. If still dry, apply a few more drops of re-inker and let it sit longer. Ensure the ink pad felt is not damaged.
Stamped image is still bleeding
Ensure the ink is completely dry before applying water-based mediums. Allow at least 15-30 minutes for drying depending on humidity and surface. Try applying mediums more sparingly.
Re-inker bottle is clogged
Check the nozzle for dried ink. Gently warm the tip with a hairdryer on a low setting or soak the tip in warm water (ensure no water enters the bottle) and try to clear the clog with a fine needle or pin.
Ink appears faded or inconsistent
Check if the ink pad is sufficiently re-inked. If the pad is saturated and the issue persists, the surface being stamped on might be highly absorbent or unsuitable. Ensure the stamp itself is clean and free of debris.
Pros and Cons
Pros
- Ensures stamped images are permanent and do not bleed.
- Compatible with a wide range of water-based mediums.
- Maintains crisp image detail.
- Designed for easy re-inking of existing ink pads.
- Acid-free and waterproof properties.
Cons
- Permanence can vary on certain surfaces.
- Requires a separate ink pad for application.
- Ink color is specific to the 'Light House' shade.
- Small bottle size may require frequent replenishment for heavy users.
Setup, Compatibility & Care
Setup:
- Uncap the Re-Inker: Carefully remove the cap from the .5 oz bottle of Tim Holtz Archival Re-Inker.
- Open the Ink Pad: Lift the lid of your corresponding Tim Holtz Archival Dye Inkpad.
- Apply Ink: Gently apply drops of the 'Light House' re-inker directly onto the dry ink pad surface. Avoid oversaturating the pad.
- Distribute Ink: Allow the ink to absorb into the pad for a few minutes. You can gently dab the pad with a clean cloth or a plastic bag to help distribute the ink evenly if needed, though absorption is usually sufficient.
- Close and Store: Close the ink pad lid securely. Store the re-inker bottle with its cap firmly in place.
Compatibility:
- This re-inker is specifically designed to refill Tim Holtz Archival Dye Ink Pads (standard size no.0).
- The ink is permanent and waterproof on many surfaces including paper, cardstock, acetate, vellum, and more.
- It is designed to be compatible with water-based inks, markers, acrylic paint, watercolors, Tim Holtz Alcohol Ink, and Perfect Pearls pigment powders.
Care:
- Store the re-inker bottle upright in a cool, dry place, away from direct sunlight.
- Ensure the cap is tightly sealed after each use to prevent drying out.
- Clean any spilled ink promptly with appropriate cleaning solutions for the surface it may have landed on.
- Archival Ink pads should be stored with the lid closed to maintain ink freshness and prevent drying.