myFirst Camera 2 - Blue


Currently unavailable


Currently unavailable
The myFirst Camera 2 is designed for children aged 4 and up who are eager to explore photography and videography. Its key benefit is a durable, waterproof, and easy-to-use interface that encourages creative capture during everyday adventures and holidays. A potential caveat is the 32GB microSD card limit, requiring management of stored media. This camera offers an 8MP sensor for HD photos and Full HD videos, a 2" IPS screen for instant review, and robust construction with reinforced polymers and a waterproof case.
| Brand | myFirst |
|---|
The myFirst Camera 2 is designed for children aged 4 and above.
No, a microSD card up to 32GB is required and sold separately.
The 1000 mAh battery provides hours of use on a single charge, depending on usage (photos vs. video).
No, the camera itself is not waterproof. It requires the included waterproof case to be submerged up to 3 meters for 180 minutes.
You can view them directly on the camera's 2" IPS screen or transfer them to a computer via the USB cable.
Yes, the camera includes built-in quirky picture frames that children can add to their photos directly on the device.
It can record videos in Full HD resolution.
Ensure the camera is charged. Connect to a power source using the USB cable and allow it to charge for at least an hour. Press and hold the power button.
Check if a microSD card is inserted and properly seated. Ensure the microSD card is not full. Format the microSD card if it shows errors (note: formatting erases all data on the card).
Clean the camera lens with a soft cloth. Ensure there is adequate lighting for the photo or video. Avoid camera shake by holding the camera steady or using the lanyard for support.
Press and hold the power button for 10-15 seconds to force a shutdown. If the issue persists, try removing and reinserting the microSD card. Consult the manual for a reset procedure if available.
Ensure the USB cable is securely connected to both the camera and the computer. Try a different USB port on the computer. Make sure the camera is turned on when connected. Restart both the camera and the computer.
Setup:
Compatibility:
Care: