Frenchic Al Fresco Paint - Brown
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Al Fresco paint in Brown is ideal for DIY enthusiasts and homeowners seeking a versatile, durable, and weather-resistant finish for both interior and exterior projects. Its key benefit is the multipurpose chalk and mineral formulation that requires no priming or sealing, offering a beautiful matte finish. A potential caveat is the need for two coats to achieve optimal coverage and longevity, especially on high-traffic surfaces.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 55774510776704 |
| Brand | Frenchic |
Extended Product Information
FAQs
Can I use this paint on garden furniture?
Yes, Frenchic Al Fresco paint is weatherproof and hard-wearing, making it ideal for outdoor furniture.
Do I need to prime before using this paint?
No, this is a self-priming paint, so no separate primer is required for most surfaces.
How many coats of paint do I need?
While one coat may provide coverage, two coats are recommended for a long-lasting, durable finish.
What is the coverage of a 750ml tin?
A 750ml tin will cover approximately 12.5m² with a single coat. For two coats, expect coverage of around 6m².
Can this paint be used in bathrooms or kitchens?
It is suitable for kitchen cupboards and ceramic wall tiles, but we recommend avoiding very wet areas like showers or bath surrounds.
Is this paint safe for children's toys?
Yes, the paint is EN71-3 certified, making it safe for use on children's toys.
How do I clean my brushes after painting?
Clean your brushes and equipment with water immediately after use.
What kind of finish does this paint have?
Frenchic Al Fresco paint provides a beautiful matte finish.
Troubleshooting
Paint is too thick or gloopy
Stir the paint thoroughly. If still very thick, you can add a tiny amount of water (no more than 5% of the paint volume) and stir well.
Uneven finish or brush marks visible
Ensure you are using a good quality brush and applying thin, even coats. Avoid over-brushing. Allow adequate drying time between coats. Lightly sand any imperfections once dry and re-coat.
Poor adhesion or peeling
Ensure the surface was properly cleaned and dry before painting. For very glossy or smooth surfaces, a light abrasion may be needed. Apply a second coat if the first was too thin.
Color does not match expectations
Colors can appear differently under various lighting conditions. Always test on a small area first. Remember this is a warm brown with subtle yellow-ochre tones.
Pros and Cons
Pros
- Extremely versatile for various surfaces and uses.
- Durable and weatherproof finish ideal for outdoor projects.
- Saves time with self-priming and self-sealing properties.
- Safe for use on children's items.
- Appealing matte finish in a versatile warm brown shade.
Cons
- Two coats are recommended for best results, increasing material usage.
- May not be suitable for very wet areas like shower surrounds.
- Coverage figures are approximate and can vary based on surface and application.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease or contaminants. For most surfaces, no priming is necessary. Lightly abrading glossy surfaces may improve adhesion.
Compatibility: Suitable for furniture, woodwork, laminate, powder-coated radiators, metal, uPVC, ceramic wall tiles (avoiding very wet areas), kitchen cupboards, front doors, and interior wood and concrete floors.
Application: Stir paint thoroughly before use. Apply with a brush or roller. Two coats are recommended for a long-lasting finish. Allow adequate drying time between coats.
Coverage: A 750ml tin covers up to 12.5m² per coat. For two coats, expect coverage of approximately 6m². A 250ml tin covers approximately 2m² for two coats.
Care: Clean brushes and equipment with water immediately after use. For finished surfaces, wipe clean with a damp cloth. Avoid abrasive cleaners.