WAGO 770 Series 5-Pole Snap-In Socket Connector - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians and installers working with grid-based lighting systems. The WAGO 770 Series 5-Pole Snap-In Socket Connector (Blue, 4.00 mm², 25A) offers rapid, reliable, and error-proof connections with its push-in cage clamp technology and coding features. A key benefit is the significant reduction in installation time and potential for wiring mistakes, though users must ensure the correct coding specification (I) is used for their application.
All features
| Model Part Number | 770-2105 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the maximum wire size this connector can handle?
This connector is designed to accommodate wires with a cross-sectional area of up to 4.00 mm².
What is the current rating for the WAGO 770-2105 connector?
The connector is rated for a maximum current of 25 Amperes.
Can I use stranded wire with this connector?
Yes, the push-in cage clamp termination is designed to accept both solid and appropriately prepared stranded conductors.
What does 'coding I specification' mean?
Coding specification 'I' refers to a specific mechanical and keying arrangement designed to prevent incorrect connections between different types of WAGO connectors within the Winsta system. Always ensure connected components share the same coding.
How do I release a wire from the connector?
Most WAGO push-in connectors, including this series, feature a release opening. A simple tool like a flathead screwdriver or a specialized WAGO release tool can be inserted into the opening to disengage the clamp and release the wire.
Is this connector suitable for outdoor use?
The standard WAGO 770 series connectors are designed for indoor electrical installations. For outdoor or wet environments, specific WAGO connectors with appropriate IP ratings should be used.
What is the warranty period for this product?
WAGO typically offers a standard warranty on their connectors. Please refer to the specific product documentation or contact WAGO support for exact warranty terms and duration.
Troubleshooting
Connector does not make electrical contact
Ensure the wire is stripped to the correct length and fully inserted into the push-in port. Check for any debris or damage at the wire end or inside the terminal. Verify the conductor is solid or stranded appropriately for push-in technology.
Connector is difficult to insert into housing
Verify that you are using a compatible WAGO Winsta Midi housing or panel cutout designed for this connector series. Ensure the mounting surface is clear of obstructions.
Wire pulls out of the connector
Ensure the wire was fully inserted until resistance was felt. Check if the wire gauge is within the 4.00 mm² capacity. Re-insert the wire firmly.
Inconsistent voltage at the load
Check all connections in the circuit, including upstream and downstream WAGO connectors and any other junction points. Ensure the conductor size is adequate for the current draw and circuit length.
Pros and Cons
Pros
- Significantly reduces installation time due to tool-free push-in termination.
- Error-proof connections through mechanical and color coding.
- Robust construction suitable for demanding applications.
- High current carrying capacity (25A) for versatile use.
- Secure and reliable connections that resist vibration.
Cons
- Requires specific WAGO Winsta Midi system components for full compatibility.
- Coding specification 'I' is specific and may not suit all general applications without verification.
- Higher initial cost compared to basic terminal blocks.
Setup, Compatibility & Care
Setup: Ensure the power source is de-energized before installation. Strip wire ends to the recommended length (typically 10-12 mm for this series). Insert the stripped conductor directly into the appropriate push-in port until it is fully seated. The connector is designed for direct snap-in mounting into compatible WAGO Winsta Midi housings or panel cutouts. Verify that the conductor size (up to 4.00 mm²) and type are suitable for the connector's rating.
Compatibility: This connector is part of the WAGO Winsta Midi series and is designed for use with other components within this series. It features coding specification 'I'. Ensure this specification matches other connected components to guarantee correct mating and prevent electrical faults. It is compatible with solid and stranded conductors within its specified gauge (4.00 mm²) and current (25A) ratings.
Care: Keep the connector clean and dry. Avoid exposure to excessive moisture or corrosive substances. Periodically inspect connections for any signs of damage or contamination. Cleaning can be done with a dry or slightly damp cloth; avoid using solvents or abrasive materials.