US PRO Spray Gun - 1.4MM LVLP Gravity Feed 600ML - 8784
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the US PRO 8784 spray gun, offering a high-performance solution for various painting tasks. It provides precise air control and efficient material usage, making it ideal for both professionals and DIY enthusiasts. However, users should be aware of the 3.2 CFM air consumption requirement, ensuring they have an adequate air compressor.
All features
| Model Part Number | 8784 |
|---|---|
| Brand | us pro |
Extended Product Information
FAQs
What type of air compressor is needed?
A compressor capable of delivering at least 3.2 CFM at 3 Bar (43 PSI) is required.
What size nozzle does this spray gun have?
The spray gun has a 1.4mm nozzle.
How do I clean the spray gun?
Disassemble the gun and clean all components with the appropriate solvent for your paint type. Pay close attention to the nozzle and air passages.
What is the capacity of the paint pot?
The paint pot has a capacity of 600ml.
What type of paint can be used?
The spray gun is compatible with a wide range of paints and coatings. Always refer to the paint manufacturer's instructions for thinning and application.
Where can I find replacement parts?
Replacement parts can often be found through the manufacturer or at automotive and hardware stores that sell spray guns.
Troubleshooting
Spray gun is not spraying paint.
Check the paint pot for paint. Ensure the air pressure is set correctly. Check for blockages in the nozzle or air passages.
Uneven paint application or splattering.
Adjust the air pressure and fan control. Ensure the paint is properly thinned. Clean the nozzle and air cap thoroughly.
Air leaks.
Check all connections for tightness. Inspect the seals and replace if necessary.
Pros and Cons
Pros
- High transfer efficiency reduces paint waste.
- Precise air control provides flexibility in application.
- The 1.4mm nozzle is versatile for various paint types.
- The gravity feed system ensures a consistent paint flow.
- Large 600ml pot capacity reduces the need for frequent refills.
Cons
- Requires an air compressor capable of delivering 3.2 CFM.
- May require practice to achieve optimal results with LVLP technology.
- Cleaning is essential after each use to maintain performance.
Setup, Compatibility & Care
- Air Compressor: Ensure your air compressor can supply at least 3.2 CFM at 3 Bar (43 PSI).
- Air Connection: Connect the spray gun to the air compressor using a 1/4" BSP air inlet fitting.
- Material Preparation: Properly thin and strain your paint according to the manufacturer's recommendations.
- Pot Connection: Attach the pot to the spray gun. The pot connection thread size is M16 x 1.5.
- Cleaning: After each use, thoroughly clean the spray gun with appropriate solvent. Disassemble the gun and clean all components.
- Compatibility: Compatible with most standard air compressors and a wide range of paints and coatings. Always refer to paint manufacturer's instructions for thinning and application.