Rustins Exterior Wood Oil Natural Finish - 500ml
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Rustins Exterior Wood Oil Natural Finish is designed for homeowners and DIY enthusiasts looking to protect and enhance all types of outdoor timber. Its key benefit is providing a durable, water-resistant seal that brings out the wood's natural beauty with high UV protection. A potential consideration is that it's a water-borne blend, which may have different application characteristics compared to traditional solvent-based oils. This penetrating oil nourishes wood with a blend of natural plant oils, dries to a hard finish, and is suitable for both interior and exterior applications, offering a quick-drying, wipe-on application.
All features
| Colour | Silver |
|---|---|
| Model Part Number | EWDOIL500 |
| Brand | Rustins |
Extended Product Information
FAQs
How long does Rustins Exterior Wood Oil take to dry?
The oil is quick-drying, typically touch-dry within 2 hours. Full curing may take longer depending on conditions.
Can I use this on treated wood?
Yes, provided the previous treatment is fully cured and compatible. Light sanding may help adhesion.
What is the coverage rate?
Coverage varies depending on the wood type and porosity, but generally expect approximately 8-10 square meters per liter.
Is this oil suitable for decking?
Yes, it is suitable for use on decking, providing protection against weathering and moisture.
How often should I reapply the oil?
Reapplication is typically recommended annually, or when the wood begins to look dry or water no longer beads on the surface.
Can I paint or varnish over this oil?
It is not recommended to paint or varnish over this oil, as it is designed to be a finishing oil that enhances the natural wood. However, if necessary, ensure the oil is fully cured and lightly abraded, though adhesion may be compromised.
Does this product have a color?
This is the 'Natural Finish' variant, designed to enhance the wood's natural color. It does not add significant pigment but may deepen the wood tone slightly.
Troubleshooting
Wood still looks dull after application
Ensure all excess oil was wiped off completely after application. A second or third coat may be needed for very dry or porous wood.
Uneven finish or patchy appearance
Surface may not have been prepared evenly, or excess oil was not removed uniformly. Ensure consistent application and removal of excess. Light sanding between coats can help.
Oil feels sticky or tacky after drying
Too much oil was applied, or excess was not wiped off thoroughly. This indicates the oil did not dry properly. This can often be rectified by buffing the surface with a clean cloth or applying a very thin coat of oil and wiping off immediately.
Water is not beading on the surface
The protective layer may have worn down due to exposure. Reapply a thin coat of the wood oil following the standard application instructions.
Pros and Cons
Pros
- Provides excellent protection against weathering and UV damage.
- Enhances the natural aesthetic of wood grain.
- Quick and easy application process.
- Suitable for a wide range of timber types and applications.
- Durable, long-lasting water-resistant finish.
- Food contact safe for added versatility.
Cons
- Being water-borne, it may require different application techniques than solvent-based oils.
- Color may vary slightly depending on the wood type.
- Requires proper surface preparation for optimal adhesion and finish.
- May need reapplication after extended periods of harsh weather.
Setup, Compatibility & Care
Preparation: Ensure the wood surface is clean, dry, and free from dirt, grease, and old finishes. Sand lightly if necessary to create a smooth surface. For previously treated wood, ensure it is fully cured or removed.
Application: Apply thinly and evenly with a clean, lint-free cloth, brush, or applicator pad. Work the oil into the wood grain. Wipe off any excess oil that has not penetrated the surface after 10-15 minutes. Allow the first coat to dry for at least 2 hours before applying subsequent coats (2-3 coats recommended for best protection).
Compatibility: Suitable for all types of exterior and interior wood, including hardwoods and softwoods. Can be used on garden furniture, decking, sheds, fences, doors, and window frames.
Care: Clean the treated surface with a damp cloth. Avoid harsh detergents. For re-oiling, clean the surface and apply a thin coat as needed, typically annually or when the water repellency diminishes.