Dr. Ph. Martin's Frisket Liquid Masking Fluid - Level 2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Dr. Ph. Martin's Frisket Mask Liquid (Level 2) is for artists seeking precise control over their work, allowing specific areas to be protected during the application of various mediums. Its key benefit is enabling clean, sharp edges for detailed masking effects. A potential caveat is that it may adhere strongly to certain delicate surfaces if left on for extended periods. This latex-based fluid is designed to protect artwork areas, adheres to watercolor paper and other surfaces, and removes easily by hand or gentle rubbing.
All features
| Model Part Number | FRSK10OZLVL2 |
|---|---|
| Brand | Dr. Ph. Martin's |
Extended Product Information
FAQs
How long can I leave the masking fluid on my artwork?
It is generally recommended to remove the masking fluid within 24 hours of application. Leaving it on for extended periods, especially on certain surfaces or in humid conditions, can make it more difficult to remove and may potentially damage the paper.
Can I use this on surfaces other than watercolor paper?
Yes, it adheres well to a variety of surfaces like illustration board and Bristol board. However, it's always best to test on a small, inconspicuous area of your specific surface first to ensure compatibility and ease of removal.
What is the difference between Level 2 and other levels of frisket?
Level 2 is a standard opacity and removal characteristic. Higher levels might offer more opacity or be designed for different removal methods, while lower levels might be more fluid or easier to remove but less visible. Level 2 provides a good balance for general use.
How do I clean my brushes after using this product?
Clean your brushes immediately after use with warm water and mild soap. If the masking fluid has dried on the brush, soak it in warm water for a few minutes before cleaning.
Can I apply multiple layers of masking fluid?
Yes, you can apply multiple layers. Ensure each layer is completely dry before applying subsequent layers or mediums. This allows for complex masking designs.
Does this product contain latex?
Yes, Dr. Ph. Martin's Frisket Mask Liquid is a latex-based product.
Where is this product made?
This product is proudly made in the USA.
Troubleshooting
Masking fluid is difficult to remove
Ensure the mask was not left on for an extended period (over 24 hours). Try gently rubbing with a clean finger or a soft art eraser. If it's still stubborn, a small amount of mineral oil or specialized mask remover applied to a cloth can help, but test in an inconspicuous area first.
Masking fluid tears the paper upon removal
The paper may be too delicate, or the mask was left on too long. Rub more gently with a soft eraser or finger. Avoid using sharp objects for removal. Ensure the paper is completely dry before application and removal.
Masking fluid leaves a faint outline or residue
This can happen if the mask was applied over a sensitive surface or removed improperly. Gently buff the area with a clean, soft cloth. For persistent marks, a very mild art-grade cleaner or a kneaded eraser might help, but use with extreme caution.
Brush clogs during application
The masking fluid has likely started to dry in the brush. Clean the brush immediately with warm water and soap. To prevent this, work quickly or keep a second brush ready to swap. You can also thin the fluid slightly with distilled water if it becomes too thick.
Pros and Cons
Pros
- Enables precise masking for detailed artwork.
- Works effectively on watercolor paper and other surfaces.
- Removes cleanly without damaging most paper types.
- Suitable for artists of all skill levels.
- Provides sharp, defined edges for color transitions.
Cons
- Can be difficult to remove if left on for too long.
- May lift some delicate paper fibers if rubbed too aggressively.
- Requires a drying time before applying other mediums.
- Not suitable for very porous or textured surfaces without testing.
- May leave a slight residue on certain non-paper surfaces.
Setup, Compatibility & Care
Setup: Shake the bottle well before use. Apply the Frisket Mask Liquid with a brush or ruling pen to the areas of your artwork you wish to protect. Allow the liquid mask to dry completely before applying paints, inks, or other wet mediums. This typically takes 15-30 minutes depending on humidity and application thickness.
Compatibility: This product adheres well to watercolor paper, illustration board, and similar prepared art surfaces. It is not recommended for use on raw canvas or unprimed surfaces as it may absorb into the material. Always test on a scrap piece of your intended surface first.
Care: Store the bottle in a cool, dry place, away from direct sunlight. Ensure the cap is tightly sealed after each use to prevent drying. If the liquid mask begins to thicken, a small amount of distilled water can be added sparingly, though this may affect its adhesive properties. Clean brushes immediately after use with soap and water.