Ammo by MIG - RLM 70 Schwartzgrun Acrylic waterbased colour 17ml - A.MIG-232
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for modelers and hobbyists looking to achieve authentic Luftwaffe aircraft colors using Ammo by MIG RLM 70 Schwartzgrun acrylic paint (A.MIG-232). This water-based acrylic paint provides excellent coverage and is ideal for both brush and airbrush applications. A key benefit is its historical accuracy, allowing for realistic recreations of WWII German aircraft. However, remember to properly thin the paint for airbrushing to avoid clogging.
All features
| Model Part Number | A.MIG-232 |
|---|---|
| Brand | MIG |
Extended Product Information
FAQs
Can I use this paint on other materials besides plastic?
Yes, it can be used on resin, metal, and other modeling materials. Ensure the surface is properly prepared.
What thinner should I use?
Use a dedicated acrylic thinner. Water can also be used, but may not provide the best results.
How many coats should I apply?
Apply multiple thin coats rather than one thick coat for the best finish. Allow each coat to dry completely before applying the next.
How do I clean my airbrush after using this paint?
Clean your airbrush immediately after use with water or an acrylic airbrush cleaner.
What is the drying time?
Drying time varies depending on the thickness of the coat and environmental conditions, but it typically dries to the touch within 15-30 minutes and is fully cured in a few hours.
Can I mix this paint with other acrylic paints?
Yes, you can mix it with other acrylic paints to achieve custom colors.
Is a primer necessary?
Priming is recommended for the best adhesion and finish, especially on plastic models.
Troubleshooting
Paint is clumping or drying too quickly.
Ensure proper thinning with acrylic thinner. Adjust the air pressure on your airbrush. Ensure the paint is not exposed to excessive heat or direct sunlight.
Paint is not adhering to the surface.
Ensure the model surface is clean and primed. Consider using a specific acrylic primer for plastic models.
Airbrush clogging.
Thin the paint adequately. Clean the airbrush thoroughly after each use.
Pros and Cons
Pros
- Water-based formula for easy cleanup and reduced odor.
- Specifically formulated for modeling, providing authentic colors.
- Suitable for both brush and airbrush applications.
- High-quality pigments for excellent color and coverage.
- Dries relatively quickly, speeding up the modeling process.
Cons
- May require thinning for optimal airbrushing performance.
- Color accuracy relies on proper application and technique.
Setup, Compatibility & Care
- Preparation: Ensure the model surface is clean and free of dust, grease, or other contaminants.
- Thinning (for Airbrushing): Thin the paint with an acrylic thinner. The recommended ratio is 1:1, but adjust based on your airbrush and desired effect.
- Application: Apply thin, even coats to avoid runs and ensure proper drying.
- Brushing: Apply directly from the jar. Multiple thin coats are recommended for optimal results.
- Drying Time: Allow each coat to dry completely before applying the next. Drying time varies depending on humidity and thickness.
- Cleaning: Clean brushes and airbrushes immediately after use with water or an acrylic cleaner.
Compatibility
This paint is compatible with most acrylic primers and varnishes. Always test compatibility on a small, inconspicuous area before applying to the entire model.
Storage
Store the paint in a cool, dry place away from direct sunlight. Ensure the jar is tightly sealed to prevent drying.