Digital Audio Coax SPDIF Phono RCA to Optical TOS Converter Adapter - kenable - 008010
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The kenable 008010 Digital Audio Converter is designed for audiophiles and home theater enthusiasts who need to bridge the gap between legacy audio gear and modern input hardware. It serves as a reliable bridge to convert Phono (RCA) coaxial signals into TOS optical light signals, ensuring compatibility with modern soundbars and receivers. One caveat to keep in mind is that this device is strictly intended for 240V power supplies and is not compatible with 110V systems like those found in the USA.
All features
| Model Part Number | 008010 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
Does this device work with analog RCA (Red/White) cables?
No, this device is for digital coaxial (SPDIF) signals only. It will not convert analog audio signals.
Can I use this in the USA with a travel adapter?
No, the power supply provided is strictly for 240V systems. Using it on a 110V network may result in insufficient power or device failure.
Does it support 5.1 surround sound?
The converter passes the signal provided. If your source device outputs a 5.1 PCM or bitstream signal over coax, the converter will pass it, but check your receiving device's compatibility.
Is the TOSLINK cable included?
No, you will need to provide your own optical TOSLINK cable for the output connection.
Why is there no light coming from the optical port?
The red light of the TOS optical output typically only activates when a valid digital signal is being detected and processed from the input.
Troubleshooting
No sound output to the connected optical device
Ensure the input source is set to output digital PCM and check that the optical cable is firmly seated in the output port.
Audio signal is cutting out
Verify that your coaxial cable is shielded and that it is not being pinched or bent sharply, as digital coaxial signals are sensitive to physical impedance.
Pros and Cons
Pros
- Simple plug-and-play operation with no complex driver installation
- Essential for integrating vintage audio equipment into modern setups
- Provides a clean digital-to-digital signal transfer without loss
- Includes necessary dedicated power adapter
Cons
- Not compatible with 110V electrical outlets
- Limited to one-way conversion (Coax to Optical only)
- No external volume control or signal processing features
Setup, Compatibility & Care
To set up the device, ensure the input source is configured to output PCM digital audio, as many converters do not handle compressed surround sound formats (like DTS or Dolby Digital) through coaxial inputs. Use a high-quality, short coaxial cable for the input to minimize interference.
Compatibility is limited to digital audio signals; this device will not convert analog RCA audio to digital. For care, keep the unit in a well-ventilated area to prevent overheating, and always use the included 6V power adapter. Using a third-party power supply with different voltage or amperage specifications can cause permanent damage to the internal components.