Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Built Right Bathroom Cladding Panels are designed for homeowners and contractors seeking a durable, low-maintenance wall solution for bathrooms, wet rooms, and shower enclosures. These panels offer a seamless, waterproof alternative to traditional tiles, effectively eliminating grout-related maintenance; however, successful installation requires a perfectly clean and level substrate to ensure the tongue-and-groove joints seal properly.
| Model Part Number | BR_C8 |
|---|---|
| Brand | Built Right |
Yes, provided the tiles are clean, dry, and securely fixed to the wall, and the surface is level.
A fine-tooth hand saw or a jigsaw with a blade suitable for plastics will provide the cleanest cuts.
These panels are for decorative wall surfacing; please check local building regulations regarding fire safety requirements in your specific region.
While the tongue-and-groove system is designed to be tight, it is recommended to apply a bead of silicone in shower areas to ensure 100% water-tightness.
The panels are 8mm thick, providing a robust yet lightweight wall covering.
Each pack contains 4 panels.
Check that the substrate is perfectly flat and ensure no debris is stuck inside the tongue-and-groove channel.
Ensure the adhesive was applied evenly and that the wall surface was not damp during application.
Do not use abrasive cleaners; stick to non-scratch detergents and soft microfiber cloths to maintain the gloss.
Before installation, ensure your walls are clean, dry, and structurally sound. Use a recommended panel adhesive suitable for PVC materials, applying it in vertical beads to allow for proper bonding. Always use matching trims for internal and external corners to protect the exposed edges of the panels. For maintenance, avoid abrasive sponges or harsh chemical cleaners, as these can dull the gloss finish. A soft cloth with warm soapy water is sufficient for daily cleaning. When storing panels before installation, keep them flat and away from direct heat sources to prevent warping.
