Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for anyone looking to install a clean, wireless audio solution in their bathroom, kitchen, or other moisture-prone areas. The Loops Bathroom Bluetooth Ceiling Speaker Kit offers an easy-to-install, high-quality audio experience by streaming music wirelessly from any Bluetooth-enabled device. Note that while the speakers are moisture-resistant, the amplifier should be kept away from direct water exposure.
| Brand | Loops |
|---|
Volume can be controlled using the remote control included with the kit or through the volume controls on your Bluetooth-connected device.
The speakers are moisture-resistant, designed to withstand humidity. However, they are not fully waterproof and should not be directly exposed to water.
The Bluetooth range is up to 10 meters (approximately 33 feet) in an open space.
The amplifier can only connect to one Bluetooth device at a time, but you can easily switch between devices.
The amplifier delivers 2 x 15W RMS power at 4 Ohms.
The speakers have an impedance of 8 ohms.
The speakers are 130mm in diameter, with a 114mm cut-out requirement and a depth of 65mm.
Please refer to the product documentation or contact the manufacturer for warranty information.
Check the speaker wire connections at both the amplifier and the speakers. Verify the amplifier is powered on and the volume is not muted. Ensure your Bluetooth device is connected and playing music.
Ensure Bluetooth is enabled on your device and the amplifier is within range (10 meters). Try restarting both devices. Check for interference from other electronic devices.
Check speaker placement, ensuring they are not blocked. Verify the audio source quality. Ensure speaker cones are clean and free of obstructions.
Check the power supply connection and ensure it is plugged into a working outlet. Verify that the power button on the amplifier is switched on.
