Gorilla Contact Adhesive Clear - 20G
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Gorilla Contact Adhesive Clear (20g) for crafts, DIY projects, or small repairs. The key benefit is its versatility, bonding a wide range of materials with a clear, waterproof finish. Keep in mind that it's not recommended for use on polystyrene, polypropylene, polyethylene, or similar materials.
All features
| Model Part Number | 115030 |
|---|---|
| Brand | Gorilla |
Extended Product Information
FAQs
What materials can I use this adhesive on?
This adhesive is suitable for fabric, metal, glass, wood, ceramic, leather, paper, and most plastics.
Is it waterproof?
Yes, Gorilla Contact Adhesive Clear is 100% waterproof.
How long does it take to dry?
Drying time varies depending on environmental conditions, but it typically takes 2-10 minutes to become tacky and fully dry.
Can I reposition the items after applying the adhesive?
Yes, the repositionable formula allows for adjustments before it sets permanently.
Is the adhesive paintable?
Yes, its paintable nature allows seamless integration into any craft projects.
What should I do if the adhesive gets on my skin?
If the adhesive gets on your skin, wash it off immediately with soap and water.
What should I do if the adhesive gets on my clothing?
While the adhesive is still wet, try to clean with soap and water. Once dry, removal can be very difficult.
Troubleshooting
Adhesive isn't sticking
Ensure both surfaces are clean and dry. Make sure the adhesive is tacky before joining the surfaces. Apply a thin, even layer.
Adhesive is visible after application
Apply a thinner layer of adhesive and ensure that the surfaces are pressed firmly together. Remove any excess adhesive with a clean cloth while it's still wet.
Bond not strong enough
Ensure both surfaces have been prepared properly and are clean, dry, and free of dust or oil. Allow the adhesive to dry fully before putting the item under any stress.
Pros and Cons
Pros
- Versatile: Bonds a wide range of materials.
- Waterproof: Suitable for both indoor and outdoor applications.
- Clear Finish: Provides an invisible bond for aesthetic results.
- Repositionable: Allows for precise positioning before setting.
- No-Run Formula: Ensures clean and easy application.
Cons
- Not suitable for use on polystyrene, polypropylene, and polyethylene.
- Bonding to certain materials may require specific techniques.
- May require longer drying times in humid conditions.
Setup, Compatibility & Care
Setup
- Ensure surfaces are clean, dry, and free of dust or oil.
- Apply a thin, even layer of adhesive to both surfaces.
- Allow the adhesive to become tacky, typically 2-10 minutes, depending on the environment.
- Carefully align the surfaces and press them firmly together.
- Allow to dry completely for the best bond.
Compatibility
Gorilla Contact Adhesive Clear is compatible with fabric, metal, glass, wood, ceramic, leather, paper, and most plastics. Avoid use on polystyrene, polypropylene, polyethylene, or similar materials.
Care
- Store in a cool, dry place.
- Wipe the nozzle clean after each use.
- Replace the cap tightly to prevent drying.