Hexagon Cabinet Kitchen Handles - Black - 320mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These Handle & Home Hexagon T-Bar Pull Handles are designed for homeowners looking to add a modern yet distinctive touch to their kitchen, bedroom, or bathroom cabinetry. Their key benefit lies in their unique geometric hexagon design and refined matt black finish, offering a sophisticated upgrade. A potential caveat is their specific 320mm hole center measurement, requiring precise placement.
All features
| Colour | Black |
|---|---|
| Model Part Number | HH2423HMB |
| Brand | Handle & Home |
Extended Product Information
FAQs
What material are these handles made from?
These handles are made from durable aluminium with a matt black finish.
What is the exact measurement for installation?
The critical measurement is the hole centers, which is 320mm. The total length of the handle is 383mm.
What type of screws are included?
The handles are supplied with 25mm M4 screws for installation.
Can these handles be used in a bathroom or kitchen?
Yes, the aluminium construction and durable finish make them suitable for kitchens, bathrooms, and other high-moisture environments.
How should I clean the matt black finish?
Clean gently with a soft, damp cloth. Avoid abrasive cleaners to protect the finish.
Are there other sizes available in this design?
This guide focuses on the 320mm size. Please check product listings for other available sizes in the Hexagon T-Bar Pull range.
What is the projection of the handle from the cabinet surface?
The projection is 34mm, meaning the handle extends 34mm outwards from the surface once installed.
Troubleshooting
Screws do not engage or are too short/long.
Ensure you are using the provided 25mm M4 screws. If your cabinet material is thicker than standard, you may need longer M4 screws (not included). If it's significantly thinner, the provided screws might be too long.
Handle is wobbly after installation.
Check that the screws are fully tightened. Ensure the holes drilled are accurate and the handle sits flush against the cabinet surface.
Matt black finish appears scratched.
Inspect closely; if it is a superficial scratch, try gently wiping with a soft, dry cloth. For deeper scratches, contact customer support as the finish may be compromised.
Pros and Cons
Pros
- Adds a modern and unique aesthetic to furniture.
- High-quality aluminium construction for durability.
- Matt black finish is versatile and resists fingerprints.
- Subtle textured finish adds a premium feel.
- Ideal for updating existing cabinetry with a fresh look.
Cons
- Specific 320mm hole center measurement may not fit all pre-drilled cabinets.
- Larger size might be overpowering for very small drawers or cabinets.
- Matt finish, while common, may not suit highly traditional decor.
- Requires drilling precise holes if replacing existing hardware with different measurements.
Setup, Compatibility & Care Instructions
Setup:
- Measure the distance between the center of the existing screw holes on your cabinet or drawer. Ensure this is 320mm for these handles.
- If replacing existing handles, use the pre-drilled holes. If installing new, mark and drill two holes 320mm apart.
- Insert the provided 25mm M4 screws from the inside of the cabinet/drawer.
- Align the handle with the screws and tighten firmly using a screwdriver.
Compatibility:
These handles are designed for standard cabinet and drawer fronts. The key compatibility factor is the 320mm hole center measurement. They are suitable for wood, MDF, and composite materials commonly used in furniture. Ensure your chosen furniture has adequate thickness to accommodate the 25mm screws.
Care:
- Clean with a soft, damp cloth.
- Avoid abrasive cleaners or scouring pads, as these can damage the matt black finish.
- For tougher spots, use a mild soap and water solution, then wipe dry with a clean cloth.