Warren Reed Designer Light Purple Marble Effect Bathroom Splashback - 25 x 60cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed Designer splashback is ideal for homeowners looking to add a sophisticated and practical element to their bathroom. Its primary benefit is offering a hygienic, easy-to-clean surface that resists moisture and stains, unlike traditional tiles with grout. A potential consideration is its specific size (W600mm x H250mm), which may require careful planning for placement. Key features include durable 6mm toughened glass, a high-quality marble-effect print, moisture and mould resistance, and a grout-free, easy-install design.
All features
| Model Part Number | 5056782157772 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What is the splashback made of?
The splashback is made from 6mm toughened safety glass with a high-quality print.
Is installation difficult?
No, the splashback is designed for easy installation without requiring drilling. Full instructions are provided.
How do I clean the splashback?
Clean using warm, soapy water and a soft cloth. Avoid abrasive cleaners.
Can this splashback be used in a shower or bath area?
It is designed for bathroom environments, particularly behind basins, and is moisture-resistant. However, it is not intended as a full shower enclosure or bath surround.
What are the exact dimensions of the splashback?
The splashback measures 600mm in width and 250mm in height (W600mm x H250mm).
Does it require grout?
No, one of its key benefits is that it is a grout-free alternative to tiles.
What adhesive should I use for installation?
Refer to the product's included instructions for recommendations on suitable adhesives or silicone sealants for glass splashbacks.
Troubleshooting
Splashback not adhering properly
Ensure the wall surface is clean, dry, and free from dust or grease. Use the recommended adhesive for glass splashbacks and follow application instructions precisely. Allow adequate curing time before exposing to moisture.
Visible smudges or water spots
Clean the splashback with a mild soap solution and a soft cloth. Dry thoroughly with a lint-free cloth after cleaning to prevent water spots.
Adhesive shows through edges
Use a minimal amount of clear, non-acidic silicone sealant or glass adhesive. Wipe away any excess immediately with a damp cloth before it dries.
Pros and Cons
Pros
- Enhances bathroom aesthetics with a stylish marble effect.
- Provides a hygienic and easy-to-clean surface.
- Resistant to moisture, mould, and stains, ideal for wet environments.
- Eliminates the need for grout, preventing mould buildup and cleaning hassle.
- Simple, drill-free installation process.
- Durable construction with toughened safety glass.
Cons
- Fixed size (W600mm x H250mm) may not suit all spaces.
- Requires specific adhesive for glass splashbacks for installation (not included).
- Potential for visible seams if multiple splashbacks are used side-by-side.
- Surface may be susceptible to scratches from abrasive cleaning materials.
- Color might not match all existing bathroom décors.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface behind the basin is clean, dry, and smooth.
- Refer to the included instructions for the recommended adhesive or silicone sealant suitable for glass splashbacks.
- Carefully apply the adhesive to the back of the splashback or the wall as per instructions.
- Position the splashback accurately and press firmly to ensure good adhesion.
- Wipe away any excess adhesive immediately.
Compatibility:
This splashback is designed for use behind bathroom basins. It is compatible with most standard basin and vanity units. Ensure the wall area does not exceed the dimensions of W600mm x H250mm where the splashback is intended to be fitted.
Care:
To maintain the pristine finish of your splashback, clean it regularly using a soft, damp cloth with warm, soapy water. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface or print. Rinse with clean water and dry with a soft, lint-free cloth.