Demon Tweeks Battery Terminal - Screw Fixing, Negative
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for vehicle owners and mechanics looking for a reliable negative battery terminal solution. The Demon Tweeks Screw Fixing Terminal offers a secure, solder-free connection for cables up to 300 Amps, fitting OEM post type battery terminals. A potential caveat is the maximum cable entry hole size of 8.9mm.
All features
| Model Part Number | 328 |
|---|---|
| Brand | Demon Tweeks |
Extended Product Information
FAQs
What is the maximum cable size this terminal can accommodate?
The terminal can accommodate cables with a maximum entry hole size of 8.9mm.
Do I need to solder or crimp the cable?
No, the cable is secured in place with two screws, so crimping or soldering is not required.
Can this terminal be used for both positive and negative posts?
No, this specific product is the negative version and is designed only for the negative battery post.
What is the amperage rating of this terminal?
The terminal is rated for a maximum of 300 Amps.
What material is the terminal made from?
The terminal is constructed from durable zinc alloy.
How is the cable secured to the terminal?
The cable is secured using two screws that tighten onto the cable.
Troubleshooting
Terminal does not fit battery post
Verify that you are using the negative terminal and that your battery post is a standard OEM type. This terminal is designed for specific post sizes.
Cable is loose after tightening screws
Ensure the cable end is properly seated within the terminal and that the cable diameter does not exceed the 8.9mm entry hole limit. Tighten screws firmly.
Poor electrical connection / intermittent power
Check that the screws are fully tightened and that there is no corrosion on the cable or battery post. Clean connections with a wire brush if needed.
Pros and Cons
Pros
- Easy installation without soldering or crimping
- Secure cable connection via screws
- High 300 Amp rating suitable for most vehicles
- Durable zinc alloy construction
- Designed to fit standard battery posts
Cons
- Limited to negative terminal use
- Maximum cable entry size of 8.9mm may not suit all heavy-duty cables
- Requires two screws for secure attachment
Setup, Compatibility & Care
Setup:
- Ensure the vehicle battery is disconnected.
- Select the appropriate negative terminal.
- Strip the end of the battery cable to the appropriate length.
- Insert the cable end into the terminal's entry hole, ensuring it fits within the 8.9mm maximum.
- Tighten the two screws firmly to secure the cable. Do not overtighten.
- Attach the terminal to the battery's negative post.
- Reconnect the battery power.
Compatibility:
- Designed for negative battery posts.
- Accommodates cables with a maximum entry hole size of 8.9mm.
- Suitable for applications up to 300 Amps.
Care:
- Periodically inspect the terminal for corrosion or loose connections. Clean with a wire brush if necessary.
- Ensure screws remain tight for optimal performance.