Laser Tools Rear Axle Carrier Bush Tool - BMW X5 & Range Rover
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for automotive technicians working on BMW X5 (E53) and Range Rover L322 models. The Laser Tools Rear Axle Carrier Bush Tool allows for efficient extraction and insertion of sub-frame bushes without removing the entire sub-frame, saving significant time. A key consideration is the necessity of heating the frame around the bush and using only hand tools for optimal results.
All features
| Model Part Number | 8739 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What vehicles is this tool compatible with?
This tool is designed for the BMW X5 (E53 chassis, 1999-2006) and Range Rover L322 (2001-2011) models.
Can I use this tool with an impact wrench?
No, this tool is designed for use with hand tools only. Using an impact wrench can damage the tool, the bush, or the vehicle's sub-frame.
What is the purpose of warming the frame?
Warming the frame around the bush with a hot air gun (not flame) softens the metal slightly, making the bush easier to extract and insert, and reducing the risk of damage.
Do I need to lubricate the new bush?
Yes, lubricating the new bush and its housing is highly recommended to ensure smooth insertion and prevent seizure or damage during installation.
What is the specific BMW OEM bush number this tool is designed for?
The tool is compatible with BMW OEM bush number 33 31 6 770 454.
What should I do if the tool doesn't seem to fit properly?
Ensure you are using the correct setup for the specific vehicle model and bush. Double-check alignment and confirm that no foreign objects or debris are obstructing the process. Consult the vehicle's service manual if unsure.
How often should I inspect the tool?
It is advisable to inspect the tool for any signs of wear, damage, or corrosion before each use to ensure safety and effectiveness.
Troubleshooting
Bush is difficult to remove or insert.
Ensure the frame area around the bush has been adequately warmed with a hot air gun. Verify that the tool is correctly aligned and that only hand tools are being used. Check if sufficient lubrication has been applied to the new bush.
Tool appears to be binding or not functioning smoothly.
Check for any debris or damage on the bush, frame, or tool threads. Ensure the tool is being operated in a straight and perpendicular motion relative to the frame. Confirm that the correct tool components are being used for the specific bush.
New bush is not seating evenly.
Re-evaluate the alignment of the tool and the bush. Ensure the mounting surface is clean and free of obstructions. Apply consistent, even pressure using hand tools. Overheating the surrounding frame can sometimes cause distortion; allow it to cool slightly if necessary.
Damage to the tool or vehicle components.
Immediately cease operation. Inspect the tool for damage and the vehicle component for damage. Review the usage instructions and ensure appropriate force is being applied with hand tools only. Never use impact tools with this equipment.
Pros and Cons
Pros
- Significantly reduces labor time by avoiding sub-frame removal.
- Allows for precise bush replacement in situ.
- Designed for specific, common European vehicle models.
- Minimizes risk of damage to surrounding components when used correctly.
- Professional-grade tool for efficient workshop use.
Cons
- Requires additional tools such as a hot air gun.
- Proper application demands adherence to specific procedures (heating, lubrication).
- Not suitable for use with impact tools.
- Limited to the specified BMW and Range Rover models.
- Requires user familiarity with bush replacement procedures.
Setup, Compatibility & Care
Compatibility: This tool is specifically designed for the BMW X5 (E53 chassis, 1999-2006) and Range Rover L322 (2001-2011) models, and is compatible with the BMW OEM bush number 33 31 6 770 454.
Setup and Use:
- Identify the rear axle carrier bushes that require replacement.
- Using a hot air gun, carefully warm the area of the vehicle's frame surrounding the bush. Do not use an open flame.
- Assemble the tool components according to the specific bush removal or insertion task.
- Apply the tool to the bush, ensuring it is correctly aligned.
- Use appropriate hand tools (e.g., wrenches, sockets) to operate the tool and extract or insert the bush. Apply force gradually and steadily.
- Lubricate the new bush and its housing before insertion to facilitate smooth operation and prevent damage.
- Always refer to the vehicle manufacturer's specific service instructions for critical procedures and specifications.
Care: After use, clean the tool thoroughly with a degreaser and dry it. Store in a clean, dry environment. Inspect for any signs of damage or wear before each use. Periodically apply a light coat of oil to threaded components to prevent corrosion.