Circlip Pliers - Laser Tools
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This comprehensive circlip plier set from Laser Tools is designed for mechanics and DIY enthusiasts who need a reliable tool for fitting and removing a wide range of internal and external circlips. Its key benefit is the versatility offered by five sets of interchangeable tips and precise screw action, allowing for controlled operation. A potential caveat is the specific size range, which may not cover all ultra-large or tiny circlips.
All features
| Model Part Number | 5101 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What is the difference between the 15° and 90° angled tips?
The 15° angled tips are generally used for accessing circlips in slightly recessed or angled positions, while the 90° angled tips are useful for circlips located on the ends of shafts or in more open areas where a sharper angle provides better access.
Can I use these pliers for circlips larger than 43mm internal or 36mm external?
These pliers are designed for the specified size range. Attempting to use them on significantly larger or smaller circlips may result in damage to the tool or the circlip, or ineffective operation.
How do I change the tips?
Unscrew the small retaining screw on the plier jaws, remove the current tips, insert the new tips, and re-tighten the retaining screw. Ensure the new tips are fully seated before tightening.
What material are the tips made of?
The tips are made of chrome molybdenum and are precision ground for durability and accuracy.
What is the overall length of the pliers?
The overall length of the circlip pliers is 220mm.
How wide can the jaws open?
The jaw opening is approximately 22mm.
Are these pliers suitable for hardened snap rings?
The precision ground tips are designed for standard circlips. While they can handle typical hardened snap rings within the size range, excessive force on very tough or brittle rings should be avoided to prevent damage.
Troubleshooting
Tips do not securely fit into jaws
Ensure the retaining screw is fully loosened, the tip is correctly oriented, and fully seated before tightening the screw.
Plier slips off the circlip
Verify that the correct tip size and angle are being used for the circlip. Ensure the tips are fully engaged and the circlip is not damaged or excessively worn.
Difficulty applying enough force to expand/compress circlip
Confirm that the correct tip size is used and that the screw action mechanism is clean and lubricated. For very stiff circlips, ensure adequate leverage is applied through the ergonomic handle.
Rust on tips or jaws
Clean the affected area with a fine-grade steel wool or rust remover. Apply a light coat of oil to prevent future rust. Store in a dry environment.
Pros and Cons
Pros
- High degree of versatility with multiple tip options and angles.
- Precise control mechanism aids in delicate circlip work.
- Ergonomic design enhances user comfort and reduces strain.
- Durable construction with precision-ground tips.
- Comes with a convenient storage case.
Cons
- May not be suitable for extremely large or very small circlips outside the specified range.
- Requires careful tip selection and installation for optimal performance.
- Plastic storage case may be less robust than metal alternatives.
- Potential for slippage if tips are not securely fitted or used on damaged circlips.
Setup, Compatibility & Care
Setup: To set up the circlip pliers, select the appropriate tip size and angle (e.g., 1.2mm x 15° for internal circlips). Unscrew the small retaining screw on the plier jaws, remove the installed tips, insert the desired new tips, and secure them with the retaining screw. Ensure the tips are firmly seated and the screw is tightened.
Compatibility: These pliers are designed for standard circlips within the specified size range: 9.5mm to 43mm internal and 6.5mm to 36mm external. They are compatible with common circlip types found in automotive, industrial, and mechanical applications.
Care: After use, clean the tips and jaws with a dry cloth to remove any debris or lubricant. Apply a light coat of oil to prevent rust, especially on the precision tips. Store the pliers and all tips in the provided plastic box to protect them from damage and loss. Periodically check the retaining screws for tightness.