Kolink Core Adept VGA Support Mount - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Kolink Core Adept VGA Support Mount is an essential accessory for PC builders using heavy, modern graphics cards that suffer from GPU sag. It is ideal for anyone looking to protect their PCIe slots and prevent long-term damage to the motherboard, though users should ensure their computer case has enough vertical clearance and available base space for the magnetic stand.
All features
| Model Part Number | COREADEPT-VGA-S |
|---|---|
| Brand | Kolink |
Extended Product Information
FAQs
Will this work with all graphics cards?
It is compatible with almost all standard modern GPUs. However, ensure your card has a sturdy part of the shroud or backplate to rest on.
Can this hold two GPUs?
Yes, the Kolink Core Adept is specifically designed to accommodate up to two graphics cards simultaneously.
Is the bracket conductive?
The bracket is made of metal, but it should not be in contact with electrical components. Always ensure it touches the plastic shroud or metal backplate of the GPU.
Does it come with extra padding?
The support arms feature soft contact points to prevent scratching your graphics card shroud.
Can it be used in a case without a magnetic floor?
The magnetic base is the primary mounting method. If your case is non-magnetic, you would need to use third-party double-sided tape or adhesive.
Does this affect GPU airflow?
If placed correctly, it has a negligible impact. Avoid placing the support arm directly inside the fan hub.
Troubleshooting
Support bracket keeps sliding out of place
Ensure the chassis floor is made of steel. If the floor is blocked by a power supply shroud, ensure the surface is flat and the magnet makes full contact.
GPU fan is hitting the support bracket
Reposition the support clamp to a different section of the GPU shroud or adjust the bracket angle to avoid the fan radius entirely.
Bracket height keeps dropping
Ensure the locking thumb screw on the vertical support rail is tightened firmly after adjusting the desired height.
Pros and Cons
Pros
- Prevents structural damage to the PCIe slot
- Easy installation with magnetic base
- Supports up to two graphics cards
- Highly adjustable to fit various GPU sizes
- Neutral design matches almost any build theme
Cons
- Requires significant internal clearance
- Not suitable for non-magnetic (aluminum) cases
- May block airflow if positioned directly over fans
- Takes up floor space in smaller chassis
Setup, Compatibility & Care
Setup:
- Ensure your PC is powered off and the side panel is removed.
- Place the magnetic base on the bottom of the steel chassis near the front of the graphics card.
- Adjust the height of the support clamps to match the underside of your GPU.
- Tighten the locking screws to secure the clamp position.
- Ensure the support is not pressing against fan blades, which would inhibit cooling performance.
Compatibility:
This unit is compatible with most standard ATX and Micro-ATX steel cases. It is not suitable for cases made of aluminum or those with glass floors unless you use additional adhesive methods not included in the box.
Care:
Clean the magnetic base periodically to remove dust accumulation, which can affect the strength of the hold. Wipe the black finish with a dry microfiber cloth to maintain its appearance.