Bosch Accessories - Special Punch and Die
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Bosch Die (MPN: 2608639902) is designed for professionals using Bosch nibblers (GNA 1.3, GNA 1.6, and GNA 2.0 Professional) for metal cutting tasks. It offers the key benefit of making straight and curved cuts, including complex cutouts, without distorting the material, even in tight spaces. A potential caveat is its specific compatibility with listed Bosch nibbler models.
All features
| Model Part Number | 2608639902 |
|---|---|
| Brand | Bosch |
Extended Product Information
FAQs
What Bosch nibbler models is this die compatible with?
This die is compatible with the Bosch GNA 1.3 Professional, GNA 1.6 Professional, and GNA 2.0 Professional nibbler models.
What is the maximum sheet metal thickness this die can cut?
The die is suitable for corrugated and most trapezoidal sheet metals up to 1.2 mm thick.
Can this die be used for cutting curves?
Yes, this die is designed for both straight and curved cuts, including narrow cuts and complicated cutouts.
Will cutting with this die distort the sheet metal?
This die is designed to minimize material distortion during cutting, even for complex shapes.
How should I care for the Bosch Die?
Keep the die clean and dry. Wipe it with a dry cloth after use and store it in a protective location to prevent damage and corrosion.
What is the weight of the die?
The die weighs approximately 0.110231131 pounds.
Is this die suitable for all types of sheet metal?
It is primarily designed for corrugated and most trapezoidal sheet metals up to 1.2 mm thick. Performance on other types of metal may vary.
Troubleshooting
Die not cutting cleanly
Ensure the die is correctly installed and securely fastened to the nibbler. Check the sheet metal thickness does not exceed 1.2 mm. Inspect the die for any damage or excessive wear and replace if necessary.
Material is distorting
Verify that the correct Bosch nibbler model is being used with this die. Ensure the sheet metal is properly supported during the cut. The die is designed to minimize distortion, but extreme thinness or improper support can still cause minor deformation.
Die is difficult to install
Confirm that the nibbler is unplugged. Ensure you are using the correct Bosch nibbler model for this die. Refer to the nibbler's user manual for the proper installation procedure. Clean any debris from the die and the nibbler's die holder.
Pros and Cons
Pros
- Enables precise straight and curved cuts.
- Maintains material integrity without distortion.
- Effective for complex cutouts and tight working areas.
- Lightweight and easy to handle.
- Specifically designed for compatible Bosch nibbler models.
Cons
- Limited to compatible Bosch nibbler models.
- Maximum material thickness of 1.2 mm.
- Primarily for sheet metal applications.
- Requires a compatible Bosch nibbler to function.
Setup, Compatibility & Care
Setup:
This die is designed as a replacement part for specific Bosch nibbler models. Ensure the nibbler is unplugged before attempting to install or remove the die. Follow the manufacturer's instructions for your specific Bosch nibbler model for secure attachment.
Compatibility:
This die is appropriate for the following Bosch Professional nibbler models:
- GNA 1.3 Professional
- GNA 1.6 Professional
- GNA 2.0 Professional
It is suitable for cutting corrugated and most trapezoidal sheet metals with a thickness of up to 1.2 mm.
Care:
Keep the die clean and free from debris. After use, wipe it down with a dry cloth. Store in a protective case or designated tool storage area to prevent damage and corrosion. Periodically check for wear and tear; replace if damaged or excessively worn to maintain cutting performance.