Shimano Disc Brake Mineral Oil - 100 ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for cyclists who maintain their own Shimano hydraulic disc brakes. Using genuine Shimano mineral oil ensures optimal braking performance and longevity for your braking system. A key benefit is its non-corrosive and environmentally friendly nature. Note that it's crucial to only use Shimano mineral oil, as other fluids can damage the system.
All features
| Model Part Number | Y8399802B |
|---|---|
| Brand | SHIMANO |
Extended Product Information
FAQs
How often should I bleed my Shimano disc brakes?
Bleed your brakes when the lever feel becomes spongy or the stopping power decreases. This typically happens every 6-12 months, or as needed.
Can I use other types of brake fluid?
No. Only use genuine Shimano mineral oil. Other fluids can damage your brake system.
How much oil is needed for a brake bleed?
The amount of oil needed varies depending on the system, but 100ml is usually sufficient for multiple bleeds.
Where should I store the mineral oil?
Store the oil in a cool, dry place away from direct sunlight.
What should I do if the oil spills?
Wipe up any spills immediately. Dispose of the used oil responsibly, following local regulations.
Can I mix different brands of mineral oil?
It is not recommended. Stick with genuine Shimano mineral oil for optimal performance.
How do I know if my brakes need bleeding?
If the lever feels spongy, or you have to pull the lever further than usual to engage the brakes, bleeding is likely needed.
Troubleshooting
Spongy brake lever feel after bleeding.
Re-bleed the brakes, ensuring all air is purged from the system. Check for leaks around the calipers and levers.
Brakes feel weak or have reduced stopping power.
Check for oil leaks, contamination on the brake pads, or worn brake pads. Bleed the brakes if necessary.
Brakes are making a squealing noise.
Clean the rotors with isopropyl alcohol. Inspect the brake pads for contamination or wear.
Pros and Cons
Pros
- Maintains optimal braking performance.
- Extends the life of your Shimano disc brake system.
- Environmentally friendly compared to some alternatives.
- Non-corrosive, protecting critical brake components.
- Specifically formulated for Shimano brakes.
Cons
- Requires adherence to Shimano's recommendations for use.
- Only compatible with Shimano hydraulic disc brake systems.
- May require additional tools (bleed kit) for application.
- Improper use could lead to brake failure.
Setup, Compatibility & Care
- Compatibility: This mineral oil is ONLY compatible with Shimano hydraulic disc brake systems. Check your brake model to confirm compatibility.
- Setup: The oil is used during brake bleeding. Follow the Shimano-recommended procedures for your specific brake model.
- Care:
- Store the oil in a cool, dry place.
- Keep the container sealed when not in use.
- Dispose of used oil responsibly, following local regulations.
- Avoid contact with skin and eyes; rinse thoroughly with water if contact occurs.
 - A brake bleed kit is typically required to apply the oil.