Ewbank Cordless Hard Floor Cleaner - Black

The Ewbank EWHF03988 HYDROH1 Cordless Hard Floor Cleaner is a powerful 2-in-1 cordless vacuum and ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Ewbank HYDROH1 Cordless Hard Floor Cleaner is designed for homeowners seeking an efficient way to clean sealed hard floors, combining vacuuming and washing in a single pass. Its key benefit is tackling both dry debris and wet messes simultaneously, saving time and effort. A potential consideration is its suitability primarily for hard floors, with limited effectiveness on carpets. Key features include 10,000Pa suction power, a 2-in-1 vacuum and wash function, dual-flow water control, and a self-cleaning docking station.

All features

ColourBlack
SeriesHYDROH1
Model Part NumberEWHF03988
BrandEwbank

Extended Product Information

FAQs

What types of floors can I clean with the HYDROH1?

The HYDROH1 is designed for sealed hard floors such as sealed wood, laminate, vinyl, lino, stone, and tiles. It can also freshen up thin pile rugs and doormats.

How long does the battery last?

The cordless runtime is up to 25 minutes on a full charge.

How do I clean the roller brush?

The unit comes with a self-cleaning docking station that automatically washes the roller brush after each use. You should also manually clean it if debris gets tangled.

What is the capacity of the water tanks?

Both the clean water tank and the dirty water tank have a capacity of 820ml.

Can I use any cleaning solution?

While the product description does not specify, it's generally recommended to use only water or manufacturer-approved cleaning solutions to avoid damaging the unit or leaving residue.

Does it work on carpets?

The HYDROH1 is primarily for hard floors. It can freshen up thin pile rugs and doormats by vacuuming and lightly washing, but it is not designed for deep carpet cleaning.

How do I store the cleaner?

Store the cleaner upright on its docking station. Ensure the roller brush is clean and dry before storage to prevent odors and moisture buildup. The docking station also charges the unit.

Troubleshooting

Unit not turning on

Ensure the battery is charged. Check that the unit is correctly seated on the charging base and the power indicator is active. Try a different power outlet for the charging base.

Poor suction power

Check if the dirty water tank is full and empty it. Ensure the clean water tank is adequately filled. Inspect the roller brush and air path for any blockages or debris and clean as necessary.

Water not dispensing

Verify that the clean water tank is properly installed and filled. Check the dual-flow water control switch on the floor head to ensure it's in the correct position for dispensing.

Roller brush not spinning or cleaning effectively

Ensure the roller brush is correctly installed. If using the self-cleaning function, make sure it completes the cycle. Clean any tangled hair or debris from the roller brush and its housing.

Streaks left on the floor

Empty and clean the dirty water tank. Ensure the roller brush is clean and not overly saturated. Use the correct amount of cleaning solution (if applicable) or water. Ensure floors are not excessively wet before storage.

Pros and Cons

Pros

  • Combines vacuuming and washing for faster cleaning.
  • Effective on a variety of sealed hard floor surfaces.
  • Self-cleaning function simplifies maintenance.
  • Cordless operation offers freedom of movement.
  • Leaves floors nearly dry, allowing immediate use.

Cons

  • Primarily designed for hard floors, limited carpet performance.
  • Requires regular emptying of the dirty water tank for optimal performance.
  • Cordless runtime of 25 minutes may be insufficient for very large areas.
  • Needs to be used with appropriate cleaning solutions for best results (not included in basic description).

Setup, Compatibility & Care

Setup:

  1. Assemble the handle and main unit.
  2. Fill the clean water tank with fresh water (and recommended cleaning solution, if applicable) and secure it to the unit.
  3. Place the unit on its docking station and charge fully before first use.

Compatibility:

The HYDROH1 is designed for sealed hard floors including:

  • Sealed Wood
  • Laminate
  • Vinyl
  • Lino
  • Stone
  • Tiles

It can also be used to freshen up thin pile rugs and doormats. It is not intended for deep carpet cleaning or unsealed floors.

Care:

  • After Each Use:
  1. Empty the dirty water tank.
  2. Rinse both the clean and dirty water tanks.
  3. Place the unit on the self-cleaning docking station and initiate the cleaning cycle for the roller brush.
  4. Ensure the roller brush is air-dried or fully dried before storage.
  • Regular Maintenance:
  • Periodically clean the filter according to the manufacturer's instructions.
  • Inspect the roller brush for wear and replace if necessary.
  • Wipe down the exterior of the unit and docking station with a damp cloth.