Positive head shower pump. Suitable for gravity fed systems. Anti-vibration couplers G 3/4 threaded connection to pump, 15mm push fit to pipework Intermittent (S3) rating 1 year manufacturer's warranty Pumps both hot and cold water supplies to an individual shower, bath, shower mixer or mixer tap within a bathroom, with automatic switching. WRAS approved, with quiet operation from 55dBA. Boost hot and cold water supplies to an individual shower, bath, shower mixer or mixer tap with the Showermate TP from Stuart Turner. It's a simple but effective solution - this entry-level twin shower pump is easy to install, runs quietly and is suitable for positive head applications. Twin shower pump for boosting hot and cold water Improves water supply to a single shower, bath, shower mixer or mixer tap High-quality, entry-level plastic pump with 15mm flexible hoses Quiet operation - typical noise level of 53dB(A) Anti-vibration couplers G 3/4 threaded connection to pump, 15mm push-fit to pipework Pre-wired with 1.5m power cable Intermittent (S3) rating and WRAS-approved Suitable for positive head gravity-fed systems only One-year manufacturer's warranty Stuart Turner Showermate TP Twin Shower Pump 1.5 bar in Grey Plastic. Showermate TP Standard 1.5 bar Twin Shower Pump. Designed to boost the hot cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only. Performance Maximum head - closed valve 1.5 bar / 15 metres Performance @ 9 l/min 1.0 bar Performance @ 18 l/min 0.7 bar Maximum flow 32 l/min Maximum static inlet pressure 10 metres Maximum working pressure 300 kPa / 3.0 bar Maximum ambient air temperature 40 C Min / Max water temperature Min 4 C / Max 65 C Flow switch sensitivity 0.8 l/min (approx) The UK's Quietest Shower Pumps Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available. Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn't continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. Positive Head A positive head shower pump is designed to be gravity fed, therefore it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. Flexible hoses included This shower pump comes complete with four flexible hoses, which are used to link your shower pump to both incoming and outgoing water pipes. These flexible hoses are anti-vibration which means the hoses are less prone to vibration from the pump, helping to reduce noise and prevent damage to the pump itself. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower. 1 year warranty 1.5 bar pressure Suitable for positive head applications High quality entry level plastic pump supplied with 15 mm flexible hoses WRAS approved product, Weight: 5.732018812 Pounds, Manufacturer: STUART TURNER LTD