Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Premium 6mm Glass Kitchen Splashback by Warren Reed Designer is for homeowners looking to add both durability and a striking visual element to their kitchen. Its key benefit is enhancing kitchen aesthetics with a high-resolution print while offering practical protection. A potential caveat is the requirement for specific adhesive for installation, as drilling is not advised. This splashback features toughened glass, scratch resistance, and is easy to clean, making it a stylish and functional upgrade.
| Model Part Number | WR00376-P448 |
|---|---|
| Brand | Warren Reed - Designer |
You must use a 'Clear Natural Curing Adhesive' suitable for glass splashbacks. Follow the adhesive manufacturer's guidelines for application and curing.
No, drilling into toughened glass is not recommended as it can cause it to shatter. This splashback is designed for installation using adhesive only.
The model 'WR00376-P448' is 700mm wide and 750mm high, with a depth of 0.6cm (6mm).
The design is pre-printed at high resolution. While the design itself is fixed, the splashback is available in various standard sizes to fit different kitchen spaces.
The premium 6mm toughened glass is resistant to heat up to 400°C, making it suitable for use behind standard kitchen hobs.
This product comes with a 1-year guarantee.
Yes, the glass is heat resistant up to 400°C, which is suitable for use behind standard gas or electric hobs. Ensure proper ventilation as per your hob manufacturer's guidelines.
The splashback in the 700mm x 750mm size weighs approximately 8.8 kg.
Ensure the wall surface was properly cleaned and dried before application. Verify that the correct type of 'Clear Natural Curing Adhesive' was used and applied according to the manufacturer's instructions. Check the curing time recommended by the adhesive manufacturer before applying any stress.
Avoid using abrasive cleaning materials such as scouring pads, steel wool, or gritty cleaners. Always use a soft cloth and mild cleaning solutions. Check if any sharp objects may have come into direct contact with the glass.
Use a clean, lint-free cloth for drying after washing. Consider using a glass cleaner specifically formulated for streak-free results, or a mixture of water and a small amount of vinegar. Ensure all cleaning residue is rinsed away.
This could indicate insufficient adhesive or improper application. Contact the adhesive manufacturer for advice or consider professional installation services for a re-securement.
Setup: For installation, ensure the wall surface is clean, dry, and smooth. Use a Clear Natural Curing Adhesive specifically designed for glass splashbacks. Apply the adhesive evenly to the wall or the back of the glass according to the adhesive manufacturer's instructions. Carefully position the splashback onto the wall, applying gentle pressure to ensure good contact. Allow the adhesive to cure fully before exposing the splashback to heat or moisture. Due to the weight of the glass, it is recommended to have a second person assist during installation.
Compatibility: This splashback is designed for use in kitchens behind hobs and sinks. Ensure the chosen size fits your available wall space. It is compatible with most standard kitchen layouts. It is not designed for use as a countertop or flooring.
Care: To clean, use a soft, damp cloth with a mild, non-abrasive kitchen cleaner. Avoid using abrasive scouring pads, steel wool, or harsh chemicals, as these can scratch the glass surface or damage the print. For stubborn stains, a solution of warm water and a little dish soap can be effective. Rinse with clean water and buff dry with a clean, lint-free cloth to prevent water spots.
