Vulcanizing Tyre Cement - Autogem - TR202 - 225g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Autogem Vulcanizing Tyre Cement (TR202) for tyre and tube repairs. The cement provides a strong, reliable bond for patches, ensuring a secure repair. Note that it's designed for use with Autogem patches for optimal results.
All features
| Model Part Number | TR202 |
|---|---|
| Brand | Autogem |
Extended Product Information
FAQs
What is vulcanizing cement?
Vulcanizing cement chemically bonds patches to the tyre or tube, creating a secure and durable repair.
What types of tires can I use this cement on?
It is suitable for a wide range of tires, including bicycle, car, and other types of inner tubes. Always make sure to use it with compatible patches.
How long does the cement take to dry?
Drying times can vary. Refer to the product label for specific instructions.
Do I need any special tools?
You will need a tyre repair kit including a rasp or buffer to roughen the surface and a roller or similar tool to apply pressure to the patch.
What if I use too much cement?
Excess cement can affect the bonding process. Apply a thin, even layer to both the tyre and the patch.
Can I use this cement with other brand patches?
While the cement may work, it is designed to be used with Autogem patches for the best results and a reliable repair.
How should I store the cement?
Store in a cool, dry place, away from direct sunlight and heat sources.
Troubleshooting
Patch failing to adhere.
Ensure the tyre surface is thoroughly cleaned and roughened before applying cement. Check that the patch is compatible and properly applied.
Cement takes too long to dry.
Make sure you haven't applied too much cement. Ensure the area is not exposed to extreme cold or heat during the curing process.
Pros and Cons
Pros
- Creates a permanent bond.
- Specifically designed for tyre and tube repairs.
- Works well with Autogem patches.
Cons
- Requires proper surface preparation for optimal adhesion.
- Only effective when used with compatible patches.
- Requires some time for the cement to cure.
Setup, Compatibility & Care
- Preparation: Clean and roughen the surface of the tyre or tube around the puncture. This is crucial for optimal adhesion.
- Application: Apply a thin, even layer of Autogem Vulcanizing Tyre Cement to both the prepared surface and the patch.
- Placement: Apply the patch to the tyre and press firmly, ensuring there are no air bubbles.
- Curing: Allow the cement to cure for the recommended time (check the product label) before inflating the tyre.
- Compatibility: This cement is compatible with various tyre and tube materials. Always use it with Autogem patches for best results.
- Storage: Store in a cool, dry place, away from direct sunlight.