Kitchen Handle - Copper - 160mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to replace or upgrade their kitchen cabinet handles with the Carlisle Brass Copper 160mm handle. The key benefit is a stylish and durable upgrade, instantly revitalizing your kitchen. Note that while the handle is easy to install, it's essential to measure your existing screw hole centers accurately for a perfect fit. This guide will provide all the information you need to select, install, and care for your new handles.
All features
| Colour | Copper |
|---|---|
| Model Part Number | CH440 |
| Brand | Carlisle Brass |
Extended Product Information
FAQs
What is the distance between the screw holes?
The distance between the screw holes is 160mm.
What is the overall length of the handle?
The overall length of the handle is 207mm.
What fixings are included?
The handle comes with M4 25mm fixings.
What is the finish of the handle?
The handle has a satin copper finish.
Is the handle suitable for all types of kitchen cabinets?
The handle is suitable for cabinets with 160mm screw hole centers. Check the dimensions to ensure compatibility.
How do I clean the handles?
Wipe with a soft, damp cloth. Avoid abrasive cleaners.
What is the warranty on the handle?
The handle comes with a 10-year mechanical guarantee.
What is the projection of the handle?
The projection of the handle is 26.5mm.
Troubleshooting
Handle feels loose after installation.
Tighten the screws using a screwdriver. Ensure the handle is properly aligned and the screws are not stripped.
Fixings are too long or too short.
If the fixings are too long, consider using washers. If too short, replace with appropriate length screws from a local hardware store.
Finish is scratched or damaged.
Minimize further damage by avoiding abrasive cleaners and handling carefully. Consider replacing the handle if the damage is significant.
Pros and Cons
Pros
- Easy to install with included fixings.
- Enhances the aesthetic appeal of kitchen cabinets.
- Durable and long-lasting with a 10-year mechanical guarantee.
- The satin copper finish is stylish and on-trend.
Cons
- Requires accurate measurement of existing screw hole centers.
- May not suit all kitchen styles, depending on the overall design.
- The finish may show fingerprints more readily compared to other finishes.
- Limited to a specific fixing center distance (160mm).
Setup, Compatibility & Care
Installation
- Preparation: Ensure the cabinet or drawer surface is clean and dry.
- Alignment: Position the handle over the existing screw holes.
- Fixing: Insert the M4 25mm fixings through the handle and into the cabinet or drawer.
- Tightening: Tighten the screws until the handle is secure, but do not overtighten.
Compatibility
- The handle is compatible with cabinets and drawers that have 160mm screw hole centers.
- Check the thickness of your cabinet door/drawer to ensure the 25mm fixings are the correct length.
Care
- Cleaning: Wipe the handle with a soft, damp cloth.
- Avoid Abrasives: Do not use abrasive cleaners or harsh chemicals, which can damage the finish.
- Regular Checks: Periodically check the screws to ensure they remain tight.