Loctite 3475 Metal Set - Silver - 229173
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Loctite 3475 Metal Set, an aluminum-filled epoxy adhesive. It helps in repairing and rebuilding worn metal parts, offering a durable, rust-resistant solution. A key benefit is its ability to mold around irregular shapes, but it requires a 12-hour curing time. This guide will cover key features, usage, and troubleshooting to help you get the most out of your Loctite 3475 Metal Set.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 229173 |
| Brand | Loctite |
Extended Product Information
FAQs
What materials can this product be used on?
The Loctite 3475 Metal Set is specifically designed for use on metal, particularly aluminum-based parts, pipes, and castings.
How long does it take for the epoxy to cure?
The epoxy cures in approximately 12 hours at room temperature.
Can I sand or paint the cured epoxy?
Yes, once fully cured, the epoxy can be sanded, drilled, or painted to match the surrounding surface.
What should I do if the epoxy gets on my skin?
Wash the affected area with soap and water immediately. Avoid contact with eyes.
Is the Loctite 3475 Metal Set waterproof?
Yes, once fully cured, the epoxy is waterproof and suitable for use in environments where moisture is present.
Can I use this product on plastic?
No, this product is designed for use on metal surfaces only. It is not recommended for use on plastic.
Troubleshooting
Epoxy doesn't harden.
Ensure the correct ratio of the two parts is mixed thoroughly. Check the product's expiration date.
Poor adhesion to the metal surface.
Thoroughly clean and prepare the metal surface before application to remove all contaminants.
The repair is not holding.
Make sure the epoxy has cured completely for 12 hours before putting the part back into use.
Pros and Cons
Pros
- Repairs a variety of aluminum-based products, including pipes and castings.
- Sets in just 12 hours, reducing downtime.
- Can be molded to fit irregular shapes.
- Provides a durable, rust-resistant finish.
Cons
- Requires a 12-hour curing period.
- Specific to metal repair applications.
Setup, Compatibility & Care
- Preparation: Clean the surface of the metal part thoroughly to remove any dirt, oil, or rust. Use a wire brush or sandpaper if necessary.
- Mixing: Mix the two parts of the epoxy according to the instructions on the packaging. Ensure a thorough mix for optimal performance.
- Application: Apply the mixed epoxy to the damaged area. If needed, mold it to the desired shape.
- Curing: Allow the epoxy to cure for 12 hours at room temperature. Avoid disturbing the part during this time.
- Compatibility: This product is specifically designed for use on metal surfaces, particularly aluminum-based components.
- Care: Once cured, the repaired part can be treated like new metal. Avoid exposure to extreme temperatures or harsh chemicals until fully cured.