U-Pol Reface 2K Polyester Spray Filler - UPOL/SF1
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
U-Pol Reface 2K Polyester Spray Filler is designed for professional automotive technicians and skilled DIY enthusiasts who require a superior, level foundation for vehicle bodywork repairs. Its primary benefit is the ability to create an exceptionally smooth surface, significantly reducing the labor time required for sanding and prep work; however, users should be aware that it is classified as dangerous goods and can only be shipped to UK Mainland addresses.
All features
| Model Part Number | UPOL/SF1 |
|---|---|
| Brand | U-Pol |
Extended Product Information
FAQs
Can this product be used on plastic bumpers?
While it is designed for metal and body filler, always check the specific technical data sheet for substrate compatibility before applying to plastics.
Is the hardener included?
Yes, the product is supplied with the necessary hardener to ensure it cures effectively.
What is the delivery restriction for this product?
Due to its classification as dangerous goods, it can only be delivered to UK Mainland destinations.
How long does it take to cure?
Cure time varies based on temperature and humidity; refer to the product label for specific drying times before sanding.
Can I use this as a primer?
This is a spray filler, not a primer. It is intended to fill imperfections; a dedicated primer should be used afterward to ensure topcoat adhesion.
Troubleshooting
Filler is not curing properly
Check that the hardener was mixed at the correct ratio and ensure the ambient temperature is not too low.
Spray gun clogging
Ensure the product is properly strained and that the spray gun nozzle size is appropriate for the viscosity of the filler.
Poor adhesion to surface
Ensure the substrate was sanded to the correct grit and thoroughly cleaned with a wax and grease remover before application.
Pros and Cons
Pros
- Significantly reduces manual sanding time
- Provides a perfectly level foundation for painting
- Excellent adhesion to automotive metal and body filler
- Easy to spray with professional equipment
Cons
- Strict shipping restrictions (UK Mainland only)
- Requires proper mixing with included hardener
- Must be used in a well-ventilated environment
Setup, Compatibility & Care
For optimal results, ensure the environment temperature is between 15°C and 25°C. Before application, the surface must be sanded with appropriate abrasive grades. Mix the product thoroughly with the provided hardener according to the recommended ratio to ensure a consistent cure. Clean your spray equipment immediately after use with an appropriate solvent to prevent the filler from hardening inside the fluid passages. Store the container in a cool, dry place, ensuring the lid is tightly sealed when not in use to avoid moisture contamination.