Integral LED Evofire Fire Rated Downlight - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone installing or using the Integral LED Evofire Fire Rated Downlight. The key benefit is its fire-rated design and easy installation. However, please note that it requires a compatible LED GU10 lamp, which is not included. This downlight features a sleek, can-less design, promoting better airflow for LED longevity. It's fire-resistant and complies with building regulations, making it a safe and efficient lighting solution.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 69071 |
| Brand | Integral LED |
Extended Product Information
FAQs
What type of lamps does this downlight use?
The Integral LED Evofire Downlight uses LED GU10 lamps (max 10W). Please note that the lamp is not included.
Is this downlight fire-rated?
Yes, it is fire-rated for 30/60/90 minutes.
What are the dimensions of the downlight?
The diameter is 100mm, the depth is 38mm, and the cut-out size ranges from 70mm to 100mm.
How do I install the downlight?
Installation is simple, featuring screwless push-fit terminals. Cut the hole, connect the wiring, insert the downlight, and install the GU10 lamp.
Can I use a dimmer switch with this downlight?
Yes, it is compatible with dimmer switches. Ensure that the LED GU10 lamp you choose is dimmable and compatible with your dimmer switch.
What is the warranty period?
Warranty information is not available in the product data.
What building regulations does it comply with?
It complies with Building Regulations parts B, C, E, and L.
What material is the bezel made of?
The bezel is ultra-thin (1mm) and its material is not specified in the product data.
Troubleshooting
Downlight doesn't turn on.
Check the power connection and the GU10 lamp. Ensure the lamp is properly installed and that the circuit breaker is not tripped.
Flickering light.
Check the lamp and dimmer switch compatibility. Replace the lamp or dimmer if necessary.
The downlight is not fitting correctly.
Ensure the cut-out size is within the specified range (70mm - 100mm). Double-check the installation instructions.
Pros and Cons
Pros
- Fire-rated for enhanced safety in residential and commercial settings.
- Easy installation with screwless terminals and loop-in/loop-out design.
- Promotes better airflow, increasing the lifespan of LED lamps.
- Sleek, modern design with an ultra-thin bezel.
- Complies with essential building regulations.
Cons
- Requires separate purchase of LED GU10 lamps.
- The cut-out size range may limit compatibility with existing installations.
- Maximum lamp wattage is limited to 10W.
- Not suitable for use with halogen lamps.
- Installation requires some basic electrical knowledge.
Setup, Compatibility & Care
Setup:
- Ensure the power is switched off before installation.
- Cut the required hole size (70mm - 100mm) in the ceiling.
- Connect the wires to the screwless push-fit terminals.
- Insert the downlight into the cut-out.
- Install the LED GU10 lamp. (Not included)
- Switch on the power to test the light.
Compatibility:
- Compatible with LED GU10 lamps (max 10W).
- Suitable for use with various dimmer switches, depending on the lamp used. Check lamp specifications.
- Ensure the ceiling material is suitable for recessed lighting.
Care:
- Wipe the surface with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Regularly check the lamp for proper function and replace it when needed.