Liberon Black Bison Paste Wax - Neutral - 1 Litre
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Liberon Black Bison Paste Wax Neutral is an ideal choice for woodworkers and homeowners looking to nourish, protect, and enhance interior wood surfaces such as antiques, furniture, and paneling. Formulated with a blend of high-quality beeswax and carnauba wax, it provides a durable and beautiful finish that highlights natural grain patterns. While it offers excellent versatility for various wood types, users should note that it is strictly intended for interior use and may require periodic re-application to maintain optimal protection in high-traffic areas.
All features
| Model Part Number | 105312 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
Can this wax be used on food-contact surfaces?
No, Liberon Black Bison Paste Wax is designed for interior decorative wood and furniture, not for food-contact surfaces like cutting boards or dining tables.
Does the Neutral wax change the color of the wood?
The Neutral formula is clear and will not add pigment, though it may slightly deepen the natural tone of the wood due to the oil and wax content.
How long should I wait before buffing?
It is recommended to wait until the wax has lost its initial tackiness, which usually takes around 20 to 30 minutes depending on room temperature.
Can I use this over a previously varnished surface?
Yes, it can be applied over most stable finishes to add an extra layer of protection and sheen, but you should always test a small area first.
How do I store the tin to prevent it from drying out?
Ensure the lid is pressed firmly back into place after every use and store the tin in a cool, dry place away from direct sunlight.
Troubleshooting
The wax surface feels tacky and does not buff clear.
You may have applied too much wax. Remove the excess with a clean cloth and allow it to dry thoroughly before attempting to buff again.
The finish looks dull or uneven.
This often indicates that the wood was not adequately prepared or was too porous. Lightly sand the area and apply a second, very thin coat of wax.
White marks or haze appear on the surface.
This is likely moisture trapped under the wax or insufficient drying time. Gently clean the area with a wax remover and re-wax once the wood is completely dry.
Pros and Cons
Pros
- Superior nourishing properties for dry or aged wood
- Easy to apply and buff to desired sheen
- Provides a protective barrier against dust and moisture
- Enhances the character and warmth of the wood grain
- Safe for use on antique and delicate wood surfaces
Cons
- Not suitable for high-humidity areas or outdoor exposure
- Requires manual labor for buffing to achieve high-lustre results
- Must be reapplied periodically to maintain maximum protection
- May darken some very porous or light-colored woods slightly
Setup, Compatibility & Care
Ensure that the wood surface is clean, dry, and free from dust or old finishes before application. For best results on bare wood, use a fine-grade steel wool or lint-free cloth to apply the wax sparingly in the direction of the grain. After application, allow the wax to dry—typically until it feels firm to the touch—before buffing with a soft brush or polishing cloth. For maintenance, simply dust with a dry cloth and re-apply a fresh layer of wax annually or when the wood appears dull. Always test on an inconspicuous area first to ensure compatibility, especially if applying over existing finishes.