Frenchic Wall Paint - Moon Whispers - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to refresh their walls and ceilings with a beautiful, soft grey. The Frenchic Wall Paint in Moon Whispers offers an ultra-matte finish that's easy to clean and requires no priming or topcoat, saving you time and effort. However, coverage can vary depending on the surface porosity, so make sure to calculate your needs accurately before starting.
All features
| Colour | Grey |
|---|---|
| Brand | Frenchic |
Extended Product Information
FAQs
How do I calculate how much paint I need?
Measure the surface area (length x width) of the walls and ceilings. A 2.5l tin provides approximately 17.5m² of coverage with two coats. Factor in doors and windows. Always have enough paint to complete the project.
Do I need to prime before painting?
No, Frenchic Wall Paint is self-priming, saving you time and money.
Can I use this paint in a bathroom?
Yes, but avoid very wet areas such as inside showers and bath surrounds.
How long does it take for the paint to dry?
Allow several hours for the paint to dry to the touch, and at least 24 hours for it to cure completely. Ensure good ventilation during the drying process.
How do I clean paint brushes and rollers?
Clean brushes and rollers with warm water and soap immediately after use.
Is the paint safe for use on children's toys?
Yes, it is EN71-3 certified, making it safe for use on children's toys.
What kind of finish does this paint have?
It has an ultra-matte finish.
Can I mix batches of paint?
When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting.
Troubleshooting
Uneven finish or streaks
Ensure even application, avoid over-brushing, and allow each coat to dry completely before applying the next. Use a high-quality brush or roller.
Poor coverage
Ensure the surface is properly prepared. Apply a second coat. On porous surfaces, additional coats may be needed.
Paint not adhering properly
Ensure the surface is clean and free of contaminants. Lightly sand glossy surfaces. Allow the paint to cure fully.
Pros and Cons
Pros
- Excellent coverage
- Easy to apply
- Durable and washable finish
- Low odour
- No primer or topcoat needed
Cons
- Coverage can be affected by surface porosity
- May require more than two coats on porous surfaces
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, grease, and dirt. Lightly sand glossy surfaces for better adhesion.
- Application: Stir the paint thoroughly before use. Apply two coats for a durable finish, allowing the first coat to dry completely before applying the second.
- Tools: Use a brush or roller designed for water-based paints.
- Coverage: A 2.5l tin covers up to 35m² with one coat. Expect approximately 17.5m² of coverage with two coats. Porous surfaces may require more paint.
- Compatibility: Suitable for walls, ceilings, wood, metal, uPVC, and ceramic tiles. Avoid very wet areas like shower surrounds.
- Care: Once cured, the paint is scrubbable. Clean with a damp cloth and mild detergent. Avoid abrasive cleaners.