Shopping.co.uk

Kingston Memory Module - 8 GB DDR4 2666 MHz ECC

Not AvailableKingston Memory Module - 8 GB DDR4 2666 MHz ECC

This Kingston memory module features 8 GB of DDR4 RAM with a speed of 2666 MHz and ECC (Error-Corr...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Team Group DELTA RGB DDR5 6000 MHz RAM - 32 GBFrom £459View product Team Group DELTA RGB memory module 16 GB DDR4 3200 MHz - DELTA RGBFrom £146View product HPE memory module - 16 GB DDR3 - HPE 632202-001-RFBFrom £56View product HPE 16GB DDR4-2400 Memory Module - GreenFrom £118View product

Product Information

Full details

The Kingston KSM26ES8/8HD memory module is designed for PC and server environments, offering 8 GB of DDR4 RAM to enhance system performance and stability. Its key benefit is the inclusion of ECC (Error-Correcting Code) technology, which detects and corrects common memory errors, crucial for critical applications. A potential caveat is that ECC memory requires a compatible motherboard and CPU to function, so ensure your system supports it before purchasing.

All features

Model Part NumberKSM26ES8/8HD
BrandKingston

Extended Product Information

FAQs

What is ECC memory and why is it important?

ECC (Error-Correcting Code) memory has the ability to detect and correct the most common kinds of internal data corruption. This makes it crucial for servers and workstations where data integrity and system uptime are critical.

Do I need a special motherboard or CPU for this RAM?

Yes, for the ECC feature to function, your motherboard and CPU must explicitly support ECC memory. Non-ECC RAM will work in most ECC-compatible systems, but ECC RAM may not work or function correctly in systems that do not support it.

Can I mix this ECC RAM with non-ECC RAM?

It is generally not recommended to mix ECC and non-ECC memory modules. Doing so will typically force the system to run in non-ECC mode, disabling the error-correcting capabilities.

What is the difference between buffered and unbuffered memory?

Unbuffered memory (like this module) directly connects the memory controller to the DRAM chips. Buffered memory (also known as registered) has a register chip that buffers command and address signals, reducing electrical load on the memory controller and allowing for more modules per channel, often found in higher-density server configurations.

How do I check if my system supports ECC RAM?

Consult your motherboard and CPU manufacturer's documentation or product specifications. Look for specifications mentioning support for 'ECC DDR4 Memory'.

What does CL19 mean?

CL stands for CAS Latency, which is the time delay between the memory controller requesting data from a memory module and the data being available. CL19 is a specific timing value; lower numbers generally indicate slightly faster response times.

Troubleshooting

System does not boot or POSTs with new RAM.

Ensure the RAM module is fully seated in the DIMM slot. Verify compatibility with your motherboard and CPU. Try booting with only the new module installed. If problems persist, test the module in a different slot or system if possible.

System instability or crashes (e.g., Blue Screen of Death).

Confirm that your motherboard and CPU support ECC memory. If they do, ensure the ECC feature is enabled in the BIOS/UEFI. If not, consider purchasing non-ECC RAM. Check for other potential hardware issues or driver conflicts.

RAM not recognized or showing incorrect capacity.

Verify that the RAM is correctly installed. Check the system's BIOS/UEFI to see if the full capacity is detected. Ensure your operating system is 64-bit if you are installing more than 4 GB of RAM, as 32-bit systems have limitations.

Pros and Cons

Pros

  • Enhances system stability with ECC error correction.
  • Suitable for both PC and server applications.
  • Standard DDR4 specifications for broad compatibility.
  • Energy-efficient operation at 1.2V.
  • Adequate 8 GB capacity for many tasks.

Cons

  • ECC functionality requires a compatible motherboard and CPU.
  • May not offer the highest performance compared to higher-speed or lower-latency modules.
  • Unbuffered memory might not be ideal for extreme overclocking scenarios.

Setup, Compatibility & Care

Setup:

  1. Power Down: Ensure your computer or server is completely powered off and unplugged.
  2. Open Case: Access the motherboard by removing the computer's side panel.
  3. Locate DIMM Slots: Find the memory slots on the motherboard. Consult your motherboard manual if unsure.
  4. Remove Old RAM (if applicable): Gently release the clips on either side of the existing RAM module and lift it out.
  5. Install New RAM: Align the notch on the Kingston module with the notch in the DIMM slot. Press down firmly on both ends of the module until the clips on the sides snap into place.
  6. Close Case & Power On: Secure the side panel and power on your system.

Compatibility:

  • Motherboard: This 288-pin DDR4 DIMM requires a motherboard with compatible DDR4 slots. Ensure your motherboard supports DDR4 memory and the specific frequency (2666 MHz).
  • CPU: For ECC functionality to work, your CPU must also support ECC memory. Check your CPU specifications.
  • Operating System: Most modern operating systems (Windows, macOS, Linux) support DDR4 memory and ECC without special configuration, but ensure your OS is up-to-date.

Care:

  • Handle modules by the edges to avoid touching the gold contacts or chips.
  • Install in a static-free environment if possible.
  • Keep away from liquids and extreme temperatures.
  • Ensure adequate system cooling, especially in densely populated server environments.