Multipanel Tile Effect Hydro-Lock Tongue & Groove Bathroom Wall Panel - Monument Grey - 2400mm x 598mm

Not Available Multipanel Tile Effect Hydro-Lock Tongue & Groove Bathroom Wall Panel - Monument Grey - 2400mm x 598mm

Not Available

Not Available

Indulge in the ultimate bathroom transformation with the Multipanel Tile Effect Monument Grey 2400...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This Multipanel bathroom wall panel in Monument Grey is designed for homeowners and renovators seeking a sophisticated, waterproof, and low-maintenance alternative to traditional tiles. Its key benefit is the creation of a seamless, watertight finish with an innovative Hydro-Lock & Groove system, eliminating grout and potential water damage. A potential caveat is that adhesives and sealants are sold separately and are required for installation.

All features

Model Part Number	MT780STDHLTG17
Brand	Multipanel

Extended Product Information

FAQs

What is the main advantage of using these panels over traditional tiles?

The primary advantage is the grout-free, fully waterproof surface. This eliminates common issues like mould and mildew in grout lines and significantly reduces cleaning and maintenance time.

Do I need to use a special adhesive?

Yes, a high-strength grab adhesive specifically designed for wall panels is required. This is sold separately. Follow the adhesive manufacturer's application guidelines.

Are these panels suitable for a shower enclosure?

Yes, these panels are fully waterproof and ideal for shower enclosures, offering a seamless and easy-to-clean alternative to tiles.

What is the warranty period for these panels?

Multipanel offers a 30-year warranty on these bathroom wall panels.

How do I clean the Monument Grey panels?

Clean with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals.

Can I fit these panels myself?

Yes, the panels are designed for straightforward DIY installation, featuring a Hydro-Lock & Groove system for easy connection. However, ensure you have the correct tools and follow installation guidelines carefully.

What are the dimensions of each panel?

Each panel measures 2400mm in height and 598mm in width.

Troubleshooting

Panel not locking securely

Check for any debris or obstructions in the Hydro-Lock & Groove mechanism. Ensure the panel is correctly aligned and pushed firmly into place. If slight damage is present, a small amount of filler might be needed on the receiving edge, followed by sealant.

Adhesive not holding panel

Verify that the wall surface is clean, dry, and free from dust or grease. Ensure the correct type of high-strength grab adhesive has been used and applied generously as per manufacturer instructions. Allow adequate curing time before stressing the panel.

Visible seam or gap

Re-seat the panel to ensure a tight Hydro-Lock & Groove connection. If a small gap persists, it can be masked with a high-quality, bathroom-grade silicone sealant applied carefully into the seam.

Surface scratching or damage

Avoid using abrasive cleaning materials. For minor surface scratches, a plastic polish might be effective, but significant damage may require panel replacement.

Pros and Cons

Pros

Provides a grout-free, fully waterproof surface.
Significantly easier and faster to install than traditional tiles.
Low maintenance and simple to clean.
Offers a modern, sophisticated tile effect appearance.
Durable construction with a 30-year warranty.
Environmentally conscious with FSC certification.

Cons

Requires specific grab adhesive and sealants, sold separately.
Initial cost may be higher than some basic tiling options.
Requires careful cutting and fitting for a perfect finish.
Limited by the available decors and tile sizes within the collection.
Requires a flat, smooth surface for optimal adhesion.

Setup, Compatibility & Care Instructions

Setup:

Preparation: Ensure the existing wall surface is clean, dry, smooth, and free from any contaminants. Minor imperfections should be smoothed or filled.
Cutting: Panels can be cut using standard woodworking tools. Measure and cut accurately to fit your space. Always wear appropriate safety gear.
Adhesive Application: Apply a high-strength grab adhesive specifically recommended for wall panels to the back of the panel or the wall surface according to the adhesive manufacturer's instructions.
Installation: Push the panel firmly into place, ensuring the Hydro-Lock & Groove edges engage correctly. Use a rubber mallet if necessary to ensure a tight fit.
Sealing: Apply a waterproof silicone sealant to all external corners, edges, and around fixtures (like taps or shower heads) to maintain the waterproof integrity.

Compatibility:

These panels are designed for use on bathroom walls. They are compatible with most standard bathroom plumbing and fixtures.
Ensure any substrate is rigid and stable.

Care:

Clean the panels regularly with a soft, damp cloth and mild detergent.
Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the laminate surface.
Wipe away soap scum and water residue promptly to maintain the finish.