Soudal Fix All X-Treme Power Express Bonding Adhesive - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing a fast and incredibly strong bonding solution. Soudal Fix ALL X-treme Power Express offers an impressive initial grab strength of up to 400kg/m², making it ideal for immediate bonding needs. However, keep in mind that while it sets quickly, the ultimate bond strength is achieved after complete curing. This guide provides essential information on using this adhesive effectively.
All features
| Colour | White |
|---|---|
| Model Part Number | 154560 |
| Brand | Soudal |
Extended Product Information
FAQs
What is the initial grab strength?
The initial grab strength is up to 400kg/m².
How long does it take to set?
It is hand tight in approximately 30 minutes.
Can it be used outdoors?
Yes, it is suitable for both indoor and outdoor use.
Can I paint over it?
Yes, it can be painted over with water-based paints.
What surfaces can I use it on?
It adheres to almost any surface, including wood, concrete, brick, metal, glass, and most plastics.
How should I store the product?
Store in a cool, dry place. Avoid extreme temperatures.
How do I clean up the adhesive?
Clean up uncured adhesive with a solvent, such as mineral spirits.
Troubleshooting
Adhesive isn't sticking to the surface.
Ensure the surfaces are clean, dry, and free from contaminants. Roughen non-porous surfaces.
Adhesive is taking too long to set.
Verify the expiration date of the product. Ensure the temperature and humidity are within the recommended range.
Adhesive is not fully curing.
Ensure the adhesive is exposed to air. Ensure the temperature and humidity are within the recommended range. Too much adhesive might prevent complete curing.
Pros and Cons
Pros
- Exceptional initial grab strength for immediate bonding.
- Quick setting time, reducing project delays.
- Versatile adhesion to a wide range of materials.
- Suitable for use in all weather conditions.
- Maintains flexibility, preventing bond failure due to movement.
- Non-staining on porous surfaces like marble and granite.
Cons
- Full bond strength achieved after complete cure, not immediately.
- May require surface preparation for optimal adhesion.
- Limited working time once applied.
- Specific application instructions must be followed for best results.
- Odor during application (typical of adhesives).
Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose particles. For best results, slightly roughen non-porous surfaces.
- Application: Apply the adhesive using a caulking gun. Apply in vertical beads to ensure good adhesion.
- Assembly: Immediately press the materials together. The initial grab strength will hold the items together. For heavier items, additional support may be needed during the initial 30 minutes.
- Curing: Allow the adhesive to cure completely. Full strength is achieved after 24 hours (or as specified by the manufacturer). Avoid disturbing the bond during curing.
Compatibility: Soudal Fix ALL X-Treme Power Express is compatible with a wide range of materials including wood, concrete, brick, metal, glass, and most plastics. Always test on a small, inconspicuous area first.
Care: Store the product in a cool, dry place. Avoid extreme temperatures. Clean up uncured adhesive with a suitable solvent, such as mineral spirits. Always dispose of product and packaging responsibly.